Walz & Krenzer, Inc. -Removable Lip Seal Flood Barrier - WK Model FP-LS & Model FP-M

DOWNLOADS

Removable lipseal flood barrier is our most popular flood barrier for many good reasons!

Reliable, cost effective, ready to use in seconds, flush bottom sill, lightweight. Need we say more?


Category: flood gates | manual flood gates | removable flood barriers...

MasterFormat: Exterior Specialties | Exterior Protection | Flood Barriers...



Walz & Krenzer, Inc.
91 Willenbrock Rd.
Oxford, CT 06478
Tel: (203) 267-5712
Fax: (203) 267-5716

sales@wkdoors.com

https://stopfloods.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Removable Lip Seal Flood Barrier - WK Model FP-LS & Model FP-M

Removable lipseal flood barrier is our most popular flood barrier for many good reasons!

Reliable, cost effective, ready to use in seconds, flush bottom sill, lightweight. Need we say more?

The lipseal flood barrier offers a flush bottom sill like the inflatable gasket flood barrier, plus the following additional benefits:

  • Ease & speed of use: just place the panel in the frame and slide the 2 top latch bolts in place. There are no gaskets to inflate or bolts to tighten.
  • Increased reliability: there is no inflatable gasket which could lose air pressure.
  • Radius corner reduced from 7.5″ radius to 2″.
  • Lightweight construction, including our custom aluminum skin composite panel.
  • Lower costs than inflatable gasket flood barriers.
  • The ability to utilize panels stacked on top of each other or side by side for large openings, ususally wider than 10′ or higher than 6′

Single lipseal barriers (WK model FP-LS) offer a fully watertight seal and are recommended for most applications. Multiple panel barriers (WK model FP-M) may experience very slight leakage at the corners between the panels, but the leakage rate is significantly less than FEMA allowable leakage rates.


See More


Specifications

Product Details
FeaturesDesign Details
SizeMaximum size depends on customer requirements. Openings larger than 10’wide or 6′ high often require multiple panels. No functional limit to number of panels
Design PressureTo full height of panel
Gasket MaterialEPDM Lipseal compression gasket with fully molded corners
Panel & Frame MaterialPanel is aluminum or aluminum composite; frame available in aluminum, mild steel, or stainless steel
Type of FrameBolt-on, weld-on, masonry subframe
Bottom SillsFlush
Operating MechanismQuick slide latch bolts at panel top edge; multiple sliding latches at bottom - quantity dependent on width of panel
OptionsMultiple panels with removable back, front, or top braces