Walz & Krenzer, Inc. -Hinged Lipseal Flood Barriers - WK Model FG-LS

DOWNLOADS

Hinged lipseal flood barrier - fast, reliable, & cost effective!

Close the panel, slide 2 latch bolts located at the top of the panel and several along the bottom of the panel, and you‘re fully protected from the high water event.


Category: hinged flood gates | manual flood barriers | manual flood gates...

MasterFormat: Exterior Specialties | Exterior Protection | Flood Barriers



Walz & Krenzer, Inc.
91 Willenbrock Rd.
Oxford, CT 06478
Tel: (203) 267-5712
Fax: (203) 267-5716

sales@wkdoors.com

https://stopfloods.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Hinged Lipseal Flood Barriers - WK Model FG-LS

Hinged lipseal flood barrier - fast, reliable, & cost effective!

Close the panel, slide 2 latch bolts located at the top of the panel and several along the bottom of the panel, and you‘re fully protected from the high water event. If it sounds simple, that because it is!

Hinged lipseal flood barriers are designed for locations where flooding occurs regularly, where a flush bottom sill is desired, and where the water pressure is from one side only. They are extremely easy and quick to use and have a minimal frame construction which improves the aesthetics around the opening. Both single panel and dual panel models are available. Large panels are supplied with mounted rollers for ease of opening and closing.


See More


Specifications

Product Details
FeaturesDesign Details
SizeMaximum size of single panels approximately 20’w & 12’h. Double panel barriers available.
Design PressureTo full height of panel
Gasket MaterialEPDM WK lipseal compression gasket with fully molded corners
Panel & Frame MaterialPanel is aluminum; frame available in aluminum, mild steel, or stainless steel
Type of FrameBolt-on, weld-on, masonry subframe
Bottom SillFlush
Operating MechanismQuick slide latch bolts at panel top edge; multiple sliding latches at bottom - quantity dependent on width of panel
OptionsMounted roller assemblies