Tnemec Company Inc. -Series 287 Enviro-Pox - Waterborne Epoxy-Amine Adduct

DOWNLOADS

Generic Type

Waterborne Epoxy-Amine Adduct

Common Usage

A low odor, rapid cure, wear-resistant coating for floors, walls and other substrates, capable of withstanding moderate commercial and industrial environments.


Category: abrasion resistant coatings | acid resistant coatings | special coatings...

MasterFormat: Maintenance of Wall Finishes | Flooring | Wall Finishes...



Tnemec Company Inc.
6800 Corporate Drive
Kansas City, MO 64120
Tel: (816) 326-4264

ist@tnemec.com

https://www.tnemec.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Series 287 Enviro-Pox - Waterborne Epoxy-Amine Adduct

Generic Type

Waterborne Epoxy-Amine Adduct

Common Usage

A low odor, rapid cure, wear-resistant coating for floors, walls and other substrates, capable of withstanding moderate commercial and industrial environments. It can withstand mild to moderate chemical and solvent exposures, as well as repeated cleaning. Can also be used as a primer or intermediate coat for thin film epoxy and urethane and acrylic systems.

Theoretical Coverage

818 mil sq ft/gal (20.1 m²/L at 25 microns). See APPLICATION for coverage rates. †

Curing Time

Temperature • - To Topcoat - To Place in Service

60°F (16°C) - 6-7 hours - 8-10 hours

75°F (24°C) - 4-5 hours - 7-8 hours

85°F (29°C) - 1 1/2-3 hours - 4-6 hours

• 50% relative humidity. Curing time varies with surface temperature, air movement, humidity and film thickness.

Finish

Semi-gloss

Volume Solids

51.0 ± 2.0% (mixed) †

Volatile Organic Compounds

Unthinned: 0.05 lbs/gallon (6 grams/litre)
Thinned 5% (Water): 0.05 lbs/gallon (6 grams/litre) †

Number of Components

Two: Part A (epoxy) and Part B (amine) - 2 Parts A to 1 Part B by volume

Surfacer/Filler/Patcher

Series 130, 215, 218, 1254. Note: A repair kit of 201, with Part C fumed silca, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.

Recommended DFT

Horizontal: 2.0 to 4.0 mils (50 to 100 microns) per coat. (Apply minimum of 2 coats to unpainted floors.)
Vertical: 2.0 to 3.0 mils (50 to 75 microns) per coat.

Topcoats

Series 73, 280, 290, 291, 294, 295, 296, 297, 1074, 1075, 1080, 1081

Primers

Concrete: Self-priming or Series 27WB, 201, 205, 208, 241
CMU: Self-priming over filled CMU
Wood & Drywall: Self-priming or Series 201


See More


Sweetsstakes