Tnemec Company Inc. -Series 247 EverThane - Aliphatic Moisture Cured Urethane

DOWNLOADS

Generic Type

Aliphatic Moisture Cured Urethane

Common Usage

Extremely hard, chemical-resistant urethane floor coating with superb flow characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact.


Category: abrasion resistant coatings | acid resistant coatings | aliphatic coatings...

MasterFormat: Painting and Coating | High-Performance Coatings | Abrasion-Resistant Coatings...



Tnemec Company Inc.
6800 Corporate Drive
Kansas City, MO 64120
Tel: (816) 326-4264

ist@tnemec.com

https://www.tnemec.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Series 247 EverThane - Aliphatic Moisture Cured Urethane

Generic Type

Aliphatic Moisture Cured Urethane

Common Usage

Extremely hard, chemical-resistant urethane floor coating with superb flow characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Excellent gloss and color retention. Low odor characteristic allows for use near occupied space. Note: For horizontal surfaces only.

Primers

Concrete: Series 66, 66HS, 161, 161HS, 201, 205, 237, 238, 256, 280, 281, 287. Note: Series 247 can be applied directly to concrete if a single coat urethane sealer is desired.

Finish

Gloss

Volume Solids

91 ± 2.0% (clear mixed) †

Volatile Organic Compounds

Unthinned: 0.74 lbs/gallon (89 grams/litre) †

Theoretical Coverage

1,460 mil sq ft/gal (36.0 m²/L at 25 microns). See APPLICATION for coverage rates. †

Number of Components

Two: Part A and Part B (clear).

Recommended DFT

2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats will vary depending on color, substrate (surface) and other variables. Contact your Tnemec representative.

Intermediate

Series 66, 66HS, 161, 161HS, 210, 237, 238, 256, 280, 281, 284, 285, 287
Note: Before applying Series 247 over coatings with a smooth, glossy surface, thoroughly scarify the previous coating using a power sander and 100 grit sandpaper, No. 60 mesh sanding screen or a coarse stripping pad to eliminate surface tension. Failing to uniformly degloss the entire surface or thoroughly clean all surface contamination may lead to fisheyes and/or poor adhesion. Sanding or scarification is not required when topcoating textured coatings (i.e. aggregate or colored quartz broadcast to refusal) with Series 247 if the maximum recoat time of the previous coating is met. Note: When applying Series 247 over a broadcast or mortar system, an epoxy grout coat is required.

Curing Time

Temperature - Min. Recoat ‡ - To Service - Chemical Resistance

75°F (24°C) - 12 hours - 24 hours - 7 days

‡ When recoating, the surface must be thoroughly scarified using 60 grit sandpaper or No. 60 mesh sanding screen.
Curing time varies with surface temperature, air movement, humidity and film thickness.


See More


Sweetsstakes