Tnemec Company Inc. -Series 233 Power-Tread LE - Modified Polyamine Epoxy

DOWNLOADS

Generic Type

Modified Polyamine Epoxy

Common Usage

A lower viscosity, high-solids, multi-purpose epoxy that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat.


Category: abrasion resistant coatings | acid resistant coatings | alkali-resistant coatings...

MasterFormat: Cast-In-Place Concrete | Concrete Finishing | Abrasion-Resistant Coatings...



Tnemec Company Inc.
6800 Corporate Drive
Kansas City, MO 64120
Tel: (816) 326-4264

ist@tnemec.com

https://www.tnemec.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Series 233 Power-Tread LE - Modified Polyamine Epoxy

Generic Type

Modified Polyamine Epoxy

Common Usage

A lower viscosity, high-solids, multi-purpose epoxy that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Especially useful when penetration is needed to sufficiently anchor epoxy flooring systems over lightly profiled concrete surfaces. Protects concrete surfaces from impact, abrasion and mild chemicals.

Volatile Organic Compounds

0.00 lbs/gallon (0.0 grams/litre)

Theoretical Coverage

1,604 sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.

Surfacer/Filler/Patcher

Series 206, 215. Note: A repair kit of 201, 208 or 233 with Part C fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.

Number of Components

Two: Part A and Part B (3 Parts A to 1 Part B by volume)

Finish

Gloss

Primers

Self-priming or Series 201, 208, 237, 238 or 241

Volume Solids

100% (mixed)

Recommended DFT

Primer: 3.0 to 12.0 mils (75 to 300 microns) per coat.
Broadcast: 1/16" to 1/8" (Double broadcast or slurry broadcast required to achieve 1/8"). Mortar: 3/16” to 1/4” thickness.
Grout coat: 8.0 to 16.0 mils (203 to 406 microns).
Intermediate or Topcoat: 8.0 to 16.0 mils (203 to 406 microns).

Curing Time

Temperature - To Topcoat/Broadcast - To Place in Service

75°F (24°C) - 6 to 8 hours - 16 to 24 hours

Note: If more than 16 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating. Curing time varies with surface temperature, air movement, humidity and film thickness.

Topcoats

Series 206, 206SC, 233, 237, 238, 247, 248, 252SC, 280, 280FC, 281, 282, 284, 285, 286, 287, 290, 291, 294, 295, 296 or 297. Note: If Series 233, 247 (clear), 248 (clear), 285, 294, 295 or 296 is selected for the finish coat over a decorative broadcast system, an intermediate coat of Series 233 (clear), 237 (clear), 238 (clear) or 284 is required. If Series 247 (tinted), 248 (tinted), 290, 291 or 297 is selected for the finish coat over a broadcast system, a grout coat of Series 233 (tinted) 237 or 238 (tinted), 280, 280FC or 281 is required.


See More