Tnemec Company Inc. -Series 118 Uni-Bond Mastic - Mastic Waterborne Acrylic

DOWNLOADS

Generic Type

Mastic Waterborne Acrylic

Common Usage

A high-build, rust-inhibitive, elastomeric coating formulated for exceptional adhesion and corrosion resistance over minimally prepared aged coating systems.


Category: elastomeric coatings | finishes | high-performance coatings...

MasterFormat: Painting and Coating | High-Performance Coatings | Elastomeric Coatings...



Tnemec Company Inc.
6800 Corporate Drive
Kansas City, MO 64120
Tel: (816) 326-4264

ist@tnemec.com

https://www.tnemec.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Series 118 Uni-Bond Mastic - Mastic Waterborne Acrylic

Generic Type

Mastic Waterborne Acrylic

Common Usage

A high-build, rust-inhibitive, elastomeric coating formulated for exceptional adhesion and corrosion resistance over minimally prepared aged coating systems. Series 118 is an excellent choice for projects where abrasive blast cleaning of the substrate is not possible and an anti-corrosive coating is needed. Uni-Bond Mastic accepts a variety of high-performance topcoats for the creation of a long-term protective and aesthetic coating system.

Volume Solids

55.0 ± 2.0% †

Volatile Organic Compounds

Unthinned: 0.26 lbs/gallon (31 grams/litre) †

HAPS

Unthinned: 0.02 lbs/gal solids

Theoretical Coverage

882 mil sq ft/gal (21.6 m²/L at 25 microns). See APPLICATION for coverage rates. †

Number of Components

One

Curing Time

Temperature - To Touch - To Handle - To Recoat

75°F (24°C) - 30 minutes - 4 hours - 8 hours

Curing time varies with surface temperature, air movement, humidity and film thickness.

Topcoats

Series 30, 72, 73, 700, V700, 701, V701, 740, 750, 1026, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1074, 1074U, 1075, 1075U or 1095. Note: Series 118 is not intended to be a finish coat. A topcoat is strongly recommended for aesthetics and avoidance of dirt accumulation.

Recommended DFT

6.0 to 8.0 mils (150 to 205 microns) per coat. Note: Two coats are required over bare steel. Overcoating an aged system that is mostly intact and tightly adhered can be achieved by spot priming prior to applying a full coat.

Primers

Steel: Self-priming

Finish

Matte


See More


Sweetsstakes