Smart Vent Products, Inc. -Multi-Frames (For Commercial Applications)

Multi-Frames are a great solution for non-residential projects.

Category: crawl space flood vents | fire control dampers | fire-control dampers...

MasterFormat: Masonry Cavity Drainage, Weepholes, and Vents | Wall Vents | Brick and Block Vents...

Smart Vent Products, Inc.
430 Andbro Drive, Unit 1
Pitman, NJ 08071
Tel: (877) 441-8368
Fax: (856) 269-4465

Find a rep/distributor

Request More Info


Related Products


Multi-Frames (For Commercial Applications)

About Options & Accessories
Pour-in-Place Vinyl Bucks

The SMART VENT Pour-in-Place Vinyl Buck is made of high strength PVC. Each wall buck accepts SMART VENT models 1540-510, 1540-511, 1540-150202E (1540-0039) and FLOOD VENT models 1540-520, 1540-521, 1540-150202E (1540-0239) flood vents. Fully assembled units are shipped ready to install with a protective film and wood bracing that protects the buck and flood vent when the wall is poured.

The SMART VENT Pour-in-Place Vinyl Buck comes in several widths to accommodate most standard wall thicknesses.

Trim & Sleeve Kits/Fire Dampers

The Trim Flange unit fits into the rough opening to provide a clean finished look on the interior wall. Trim flanges are available for use with standard masonry flood vents (1540-533) and Wood Wall Models (4” depth 1540-573 and 9” depth 1540-573-9) come standard in white.

The stainless steel sleeve lining is available in a 7 inch sleeve that can expand up to 12 inches, and a 10 inch sleeve that can expand up to 15 inches.

SMART VENT manufactures two UL-certified Fire Damper models. A masonry installation model (1540-530) and a wood wall installation model (1540-537). These fire dampers are certified to provide two hours of fire resistance. It is intended to be used in a situation in which fire proofing is required on a wall in which flood venting is installed, usually in a garage or vestibule. A fusible link holds a galvanized steel door in place. At 165°F (73.9°C), the link melts to permit the door to drop, blocking the path of the fire. Compatible with SMART VENT and FLOOD VENT models - The Fire Damper can safely be installed in the same cavity for either of the flood protection models, without interfering in their operation. Trim flange and inner sleeve are required for installation as well as a 8-inch minimum wall depth.

See More


Model NumberDescriptionFlood CoverageAir Ventilation
Multi-Frames (For Commercial Applications)up to 3,000 sq. ft.up to 765 sq. in.
Vent SizeRough Opening
Varies per
Varies per