Sealers - Scofield® SelectSeal™ Plus

A high-solids, low-odor, self-crosslinking, urethane fortified acrylic sealer designed to protect interior or exterior bare or previously stained concrete.

SCOFIELD® SelectSeal™ Plus is a high-solids, low-odor, self-crosslinking, urethane fortified acrylic sealer designed to protect interior or exterior bare or colored concrete. It is an excellent sealer to use over LITHOCHROME® Tintura^TM Stain, LITHOCHROME® Chemstain® Classic, LITHOCHROME® Color Hardener, SCOFIELD® Texturetop®, SCOFIELD® ReviveTM Exterior Concrete Stain, or SCOFIELD® Formula OneTM Liquid Dye Concentrate. SCOFIELD® SelectSeal™ Plus utilizes unique proprietary waterborne technology that provides superior wet slip resistance while forming a tough stain and abrasion-resistant gloss finish that is superior to most solvent-based sealers. It can be tinted to deliver a multitude of translucent colored effects, and can be used to create floors compliant to various ANSI, ASTM, NFSI, and UL traction standards. SCOFIELD Selectseal Plus can be applied by traditional, foam, or microfiber, applicators, as well as by conventional, air-assisted, airless, or HVLP spray equipment. It can be applied over a wide range of temperature and humidity conditions without cracking, crazing, frosting, or gumming.

• High-solids, low odor water based formulation.
• Enhances concrete and chemical stain colors.
• Self-Crosslinking resin system delivers superior stain, abrasion, and chemical resistance.
• Exterior durable and UV light stable.
• Apply by brush, roller, or spray.
• Can be thinned for use as a clear primer.
• Will not gum or spider-web in hot conditions.

Usage

• Ideal for food courts, pools, entry and walkways.
• Seals in color of antiquing stamp releases and stains.
• Abrasion resistant topcoat over stains, and dyes.
• As a concrete curing compound to reduce spider cracking and efflorescence.
• Prevents dusting of new or aging concrete.

Advantages

• High-solids, low odor water based formulation.
• Enhances concrete and chemical stain colors.
• Self-Crosslinking resin system delivers superior stain, abrasion, and chemical resistance.
• Exterior durable and UV light stable.
• Apply by brush, roller, or spray.
• Can be thinned for use as a clear primer.
• Will not gum or spider-web in hot conditions.

Packaging

1-gallon (3.8L) cans or 5-gallon (19L) pails.

Color

SCOFIELD® SelectSeal™ Plus is a clear semi-gloss coating that will increase in gloss as subsequent coats are applied. It can be tinted with up to 4 oz. per gallon of approved colorant or Scofield Tintura tint cups to make a multitude of colors at various levels of opacity.

Product Details

Product Information

Urethane fortified self-crosslinking acrylic copolymer, 30% solids

2 years shelf life from date of manufacture.

Store at 40°F to 120°F (4°C - 49°C). DO NOT FREEZE!

Application

Application Steps

If using spray equipment, always wear protective respirator, and mask adjacent areas to protect property from overspray. Dried material will be difficult to remove. Remove overspray immediately with hot water and detergent.

Coverage Rates

Coverage will depend upon thinning, method of application, surface porosity, and the texture of the substrate. Full strength prime-coat coverage on flat finished concrete is typically 300-400 ft²/gal (7.4-9.8 m²/L), and will yield a dry film thickness of 1.3-1.1 mils. Thinned with 1 pint of water per gallon, prime coat coverage is typically 450 ft²/gal, and will yield a dry film thickness of 0.85 mils. Porous, broom or textured finishes will require more sealer. As a topcoat or for second coat application, coverage of 600-800 ft²/gal (14.8-19.6 m²/L) is typical.

Equipment

Apply SCOFIELD® SelectSeal™ Plus by brush, roller, HVLP, airless, or pump-spray/back-roll application. Always wear protective clothing, goggles, gloves, and particulate respirators. Clean equipment with warm water and detergent immediately after application.

Spray Applicator Guidelines:
Pump Garden Sprayer: Use conical tip.

Airless spray: 1500-2500 psi (10-17 MPa) fitted with a fan tip of 0.013-0.015 inches (0.33-0.38 mm).
HVLP spray: 5-40 psi (35-275 KPa) 1.3-1.5mm tip

See More

See Less