Cementitious Coating - Sikagard®-620 FlexCoat CC
One-component, water-based, Clear Coat for Sikagard® FlexCoat ATC
Sikagard®-620 FlexCoat CC is a one component, pure acrylic finish coating for Sikagard® FlexCoat ATC in new or recoat work. Important characteristics of Top Coat are its durability and excellent weathering qualities.
- UV degradation resistant
- Tough, long-lasting finish
- Wet look appearance
- Weather-resistant
- VOC compliant
- Excellent resistance to abrasion and chemical
- Cost effective protection
- Easy to clean and maintain
- Excellent leveling ability
- Interior and exterior use
- Available in gloss and satin finishes
Usage
- Clear top coat where uniformity is desired.
- Sealer for Sikagard® FlexCoat ATC
- Brick, concrete, overlay and masonry surfaces
Advantages
- UV degradation resistant
- Tough, long-lasting finish
- Wet look appearance
- Weather-resistant
- VOC compliant
- Excellent resistance to abrasion and chemical
- Cost effective protection
- Easy to clean and maintain
- Excellent leveling ability
- Interior and exterior use
- Available in gloss and satin finishes
Packaging
5 gal (19 L) pail
Color
Clear gloss and satin finishes available
Product Details
Product Information
Chemical BaseWater based, acrylic
Shelf Life12 months from date of production if stored properly in original, un opened and undamaged sealed packaging
Storage ConditionsStore dry at 40-95 °F (4-35 °C). Protect from freezing and heat.
Condition material at 65-75 °F (18-24 °F) before using
Flash Point> 100 °F
Solid Content27 %
Technical Information
Reaction to FireNon-combustible
Resistance to WeatheringExcellent
Abrasion ResistanceExcellent
Application
Application Information
Ambient Air Temperature50-90 °F (10-32 °C)
Caution: Do not install when rainfall can be expected prior to material setting.
Substrate Temperature50-90 °F (10-32 °C)
Waiting / Recoat Times- Sikagard® FlexCoat ATC can be top coated after 24 hours.
- Allow a minimum of 60 minutes prior to recoating.
- At lower temperatures and high humidity, waiting time will be prolonged.
Application Steps
APPLICATION- Any areas of glass or other surfaces should be masked.
- Sikagard®-620 FlexCoat CC can be applied by natural bristle brush, lamb’s wool roller, or standard spray painting equipment over entire area moving in one direction.
- Apply one to two coats of Sikagard®-620 FlexCoat CC .Two coats is highly recommended in order to obtain the best performance.
- Finish to specified texture.
- As with all coatings, job site mock-ups should always be completed to confirm acceptability of workmanship and material.
- At higher temperatures, work carefully to maintain a ‘wet’ edge.
See More
See Less