Anchoring Adhesives - Sika AnchorFix®-1
High strength, two component adhesive anchoring system
Sika AnchorFix®-1 adhesive anchoring system has been specially formulated as a high-performance, two component adhesive anchor system for threaded and reinforcing bars in uncracked concrete.
- Fast curing
- Standard guns can be used
- Can be used at low temperatures
- High load capacity
- Non-sag, even overhead
- Styrene-free polyester resin
- Low wastage
Usage
As a fast curing anchoring adhesive for all grades of: - Rebars / reinforcing steel
- Threaded rods
- Bolts and special fastening systems
Can be used on: - Uncracked Concrete
- Solid masonry
- Hard natural stone*
- Solid rock*
* These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika AnchorFix®-1 Adhesive must be tested by first applying Sika AnchorFix®-1 Adhesive only to a sample area. Check in particular bond strength, surface staining and discoloration.
Advantages
- Fast curing
- Standard guns can be used
- Can be used at low temperatures
- High load capacity
- Non-sag, even overhead
- Styrene-free polyester resin
- Low wastage
Packaging
10.1 fl.oz. (299 ml)
Color
uniform gray
Product Details
Sustainability / Certifications / Approvals
APPROVALS / STANDARDS- European Technical Approval (ETA) according to ETAG001-5 for threaded bars only.
Product Information
Shelf Life12 months from date of production
All Sika AnchorFix®-1 cartridges have the expiry date printed on the label.
Storage Conditions Cartridges should be stored in their original packaging, the correct way up, in cool conditions 41 °F to 77 °F (5 °C to 25 °C) out of direct sunlight.
Application
Application Information
Mixing RatioComponent A : component B = 10 : 1 by volume
Sag FlowNon-sag, even overhead
Product TemperatureSika AnchorFix®-1 must be at a temperature of between 41 °F (5 °C) and 104 °F (40 °C) for application.
Dew Point- Beware of condensation.
- Beware of frost.
Consumption
Application Steps
SUBSTRATE QUALITY- Mortar and concrete must be at the required strength. No need to be 28 days old.
- Substrate strength (concrete, masonry, natural stone) must be verified.
- Pull-out tests must be carried out if the substrate strength is unknown.
- The anchor hole must always be clean, dry, free from oil and grease etc.
- Loose particles must be removed from the holes.
- Threaded rods and rebars have to be cleaned thoroughly from any oil, grease or any other substances and particles such as dirt etc.
CLEANING OF TOOLSTools must be cleaned as soon as possible with a clean rag.
See More
See Less