Acrylic Bonding Agents - SikaLiquid® Weld

Concrete and Plaster Bonding Agent

SikaLiquid® Weld is a VAE based re-emulsifiable bonding agent. SikaLiquid® Weld is used to bond new concrete, stucco, tile setting beds and terrazzo to any structural sound surface, interior and exterior.

• Re-emulsifiable or re-wettable
• Extended open time
• Increased bond strength
• High build bonding agent
• Improved repair durability

Usage

• Bond new concrete to new or old concrete
• Interior or Exterior use
• Vertical or Horizontal
• Use on concrete, concrete block, cement board, hardiboard, plywood, brick, plaster, tile, gypsum, or stone

Advantages

• Re-emulsifiable or re-wettable
• Extended open time
• Increased bond strength
• High build bonding agent
• Improved repair durability

Packaging

1 gal (3.78 L) can

2 cans per box

Color

Light Blue

Product Details

Product Information

12 months from date of production if stored properly in original, unopened and undamaged sealed packaging

Store in cool, frost-free conditions with temperatures

between 50 °F to 90 °F (10 °C to 32 °C).
Condition product to between 50 °F to 90 °F (10 °C to 32 °C).

1,000 cps

Application

Application Information

1 hour

Consumption

150-300 ft² (14-27.9 m²) per can

(Coverage figures do not include allowance for surface profile and porosity or material waste)

Application Steps

• Prior to installation, stir SikaLiquid® Weld before use for consistent dispersion.
• Apply Undiluted.

• Apply SikaLiquid® Weld uniformly over the substrate using a stiff brush, broom, roller or spray to form a continuous film.
• Reapply SikaLiquid® Weld that are not covered entirely.
• Allow film to dry for approximately 1 hour prior to application of mortars, concrete or stucco.
• Dry time can be affected by temperature and humidity, check to make sure product is dry to the touch before topping.
• Extremely porous substrates may require 2 coats of SikaLiquid® Weld.
• Protect newly applied SikaLiquid® Weld from dust, dirt, debris and moisture.

See More

See Less