Acrylic Bonding Agents - SikaLatex® R

Acrylic latex bonding agent/admixture for portland-cement mortar/concrete

SikaLatex® R is an acrylic-polymer latex. It is not re-emulsifiable. It is a general purpose admixture which will produce polymer-modified concrete and mortar. Sika Latex R is also a bonding grout when mixed with sand and portland cement.

• Concrete/Mortar/Grout/etc. containing SikaLatex® R exhibits improved adhesion to pre-pared substrates
• Increased adhesive strength of mortar/concrete when used as a bonding grout
• Increased resistance to freeze/thaw durability
• Does not produce a vapor barrier

Usage

• Admixture (replacing water) used in cement based products to improve adhesion, achieve a denser surface, and improve overall performance
• As a bonding grout (prime coat) when mixed with sand and portland cement

Advantages

• Concrete/Mortar/Grout/etc. containing SikaLatex® R exhibits improved adhesion to pre-pared substrates
• Increased adhesive strength of mortar/concrete when used as a bonding grout
• Increased resistance to freeze/thaw durability
• Does not produce a vapor barrier

Packaging

1 qt. (.94 L), 6/case

1 gal. (3.8 L) jug, 4/case

5 gal. (19 L) pail

55 gal. (208 L) drum (special order)

Color

Milky-white.

Product Details

Product Information

Shelf Life

12 months in original, unopened containers

Storage Conditions

Store dry at 40 to 95 °F (4 to 35 °C). Condition material to 60 to 75 °F (15 to 167 °C) before using. Protect from freezing. If frozen, discard

Application

Consumption

Coverage

As mixing solution: for Concrete/Mortar/Grout/etc. use neat, replacing the amount of water typically recommended

As a bonding grout: estimated coverage based on amount of material (sand/cement) mixed

Application Steps

MIXING

As admixture/mixing solution: With mixer running, add materials in the following order: SikaLatex® R solution and then the cement based product. Replace the amount of water recommended by the product. Do not dilute with water.
As a bonding grout: With the mixer running, add in the following order. SikaLatex® R solution, aggregate, cement. The ratio is 1 part cement, 2 parts sand, and a sufficient amount of undiluted SikaLatex® R to produce a creamy paint consistency. Maximum 4 gal./sack of cement (15L/sack of cement).
As a primer for acrylic coatings: No dilution is required. Use as is.

See More

See Less