Richards-Wilcox -Alumatite Series Sectional Aluminum Overhead Doors

DOWNLOADS

Alumatite Door Systems are designed to provide an attractive and practical solution when maximum light and/or visibility is required.


Category: aluminum garage doors | metal garage doors | overhead sectional doors...

MasterFormat: Specialty Doors and Frames | Panel Doors | Sectional Doors



Richards-Wilcox
5100 Timberlea Boulevard
Missisauga, ON L4W2S
Tel: (800) 667-1572
Fax: (905) 625-0057

thegarage@raynor.com

https://www.rwdoors.com/overhead-doors/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Alumatite Series Sectional Aluminum Overhead Doors

Alumatite Door Systems are designed to provide an attractive and practical solution when maximum light and/or visibility is required. Built to withstand heavy use and high traffic using extruded aluminum alloy rails and stiles with a full width integral horizontal reinforcing truss at each pair of meeting rails. Highest quality hardware components provide years of dependable operation. Choose from a variety of finish and glazing options or configure your door with Thermatite panels for extra strength and additional energy savings.


See More


Specifications

Section Details
  • Section Thickness
  • A150 / A150T 1 1/2″ (38mm)
  • A175 / A175T 1 3/4″ (45mm)
  • Section Framing
  • Fabricated from 6063-T6 aluminum alloy extrusions, extrusion thickness 0.075″ (1.9mm) thick, and 0.105″ (2.7mm) thick at hardware mounting locations.
  • End stiles: 3 3/8″ (86mm) wide aluminum for single end roller brackets; 6 3/8″ (162mm) for double end roller brackets
  • Centre stiles: 2″ (51mm) wide aluminum
  • Pair of meeting rails: 3 1/4″ (83mm) high, aluminum
  • Top and bottom rails: 3 3/8″ (86mm) high, aluminum
  • Glazing Sections
  • 1/8″ (3mm) thick or 1/4″* (6mm*) thick clear acrylic, polycarbonate, plain or tempered glass or 1/2″ (13mm) thick sealed plain or tempered glass
    * Not available for A150
  • Self-aligning glazing retainer
  • Paneled Sections
  • Fabricated from 0.05″ (1.29mm) thick stucco embossed aluminum sheet.
  • Thermatite Bottom Section (optional top section)
  • Insulated sections fabricated from pre-painted, hot dipped galvanized, steel sheet; with rigid polyurethane insulation core, CFC and HCFC free, face sheet stucco embossed and rib reinforced.
  • T150-MR / T150 R 13.21 ft2 hF/Btu / U 0.430 W/m2K
  • T175-MR / T175 R 16 ft2 hF/Btu / U 0.355 W/m2K
  • Reinforcement
  • 0.105″ (2.7mm) thick aluminum extrusion for hardware mounting. Full width integral horizontal, reinforcing truss at each pair of meeting rails. Minimum depth of 1 3/4″ (45mm)
  • Opening Width
  • All models 16’-2″ (4928mm)
  • Opening Height
  • All models 16’-0″ (4877mm)
  • Warranty
  • 1 year on materials and workmanship