Raynor Garage Doors -AlumaView® AV175 Commercial Sectional Rail & Stile Door

AlumaView® AV175

Aluminum Sectional Rail and Stile Doors

This benchmark commercial door provides Raynor reliability and durability to meet, or exceed, the requirements of daily use.

Category: aluminum garage doors | aluminum sectional doors | commercial garage doors...

MasterFormat: Specialty Doors and Frames | Panel Doors | Sectional Doors

Raynor Garage Doors
P.O. Box 448
1101 East River Road
Dixon, IL 61021 -0448
Tel: (800) 472-9667
Fax: (815) 285-7144



Find a rep/distributor

Request More Info


Related Products


AlumaView® AV175 Commercial Sectional Rail & Stile Door

AlumaView® AV175

Aluminum Sectional Rail and Stile Doors

This benchmark commercial door provides Raynor reliability and durability to meet, or exceed, the requirements of daily use. With 1-3/4″ thick door sections and streamlined rail construction, the Raynor AlumaView AV175 door is engineered for lasting beauty and durability.

AV175 Features and Options

Raynor AlumaView AV175 aluminum commercial doors are available with numerous features and options, including those listed below.

Years of Durability

Door sections are clear-anodized for maximum durability and are designed to withstand minimum wind loads of 20 p.s.f. Higher pressure ratings are available upon request.

Rugged Hardware and Springs

Your AlumaView door comes packaged with the right combination of hardware, track, and springs to match your door’s size and application.

Decreased Energy Costs

AlumaView doors help you reduce energy costs with a U-shaped, vinyl bottom weatherseal secured by a sturdy aluminum retainer.

Snap-in Retainer

AlumaView panels and glass are sealed and held in place with a snap-in retainer. Clear anodized, RAL9003, RAL 9016 and standard white doors use gray snap-ins. All other doors use black snap-ins.

Integral U-Bar

Integral U-bar construction within the rails of the AV300 creates added strength to the section panels and provides for a clean look on the interior of the door by removing trussing obstructions from visible areas (only required in doors wider than 18’2″).

Header Seal

Flexible vinyl flap header seal reduces air infiltration and energy costs by sealing the top of the door against the header.

Jamb Seal

EPDM rubber jamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the door when closed.

Choice of Windows

For maximum design flexibility, choose from tempered, tinted, double-strength, insulated, acrylic, polycarbonate or impact resistant glass in a variety of thicknesses.


The EnduraCote hardware system comes with springs, track, and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.

Anodized Finishes

Choose from six custom anodize finishes including champaign, light bronze, medium bronze, dark bronze, extra dark bronze, or black.

Aluminum Panels

For busy work environments and to prevent glass breakage, aluminum panels protect your investment. Choose from impact resistant and insulated panels as well.

High-cycle Counterbalance System

For reliable operation in high-traffic areas, choose high-cycle torsion springs with 25,000, 50,000, or 100,000-cycle life. For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system.


In applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.

Carbon Monoxide Vent

Allows you to channel fumes to the outside when the door is closed. Available in a variety of sizes.

Customized Track*

Track systems are supplied to fit special clearances, inclines or contour applications. Hardware and track systems can be customized to fit any need. Additional trussing is available for special wind loading applications. *Some options may be limited to door size or model.

See More


Product Details
TypeCommercial Sectional Garage Doors
ModelAlumaView AV175
Size16′ x 14′ Max
OperationManual, Motor or Hand Chain
ConstructionRail & Stile - minimum .05″, 5/16″ diameter screws
Surface TextureSmooth
Section JointShip Lap
Section Thickness1-3/4″
StilesExtruded aluminum - minimum .05″
Insulation3/8″ Expanded Polystyrene (in panels only)
SealsBottom Seal (3″, 4″ Gray; 3″ Yellow; or 3″ Black EPDM), Optional EPDM Header Seal
TrussingMaterial: Optional U-bar (18-Gauge or 20-Gauge - can have up to 1 U-bar per door)
Panel ConfigurationNA
ColorClear Anodized or Optional ArmorBrite Powder Coat System 188 custom colors available, or Bronze Anodized, Black Anodized
Windows1/8″ DSB Glass; 1/8″ 1/4″ 3/16″ Clear Tempered Glass; 1/8″ 1/4″ Tinted or Tinted Tempered Glass; 3/16″ 1/4″ Clear Glass; 1/4″ Clear Laminated Glass; 1/4″ Clear Wire Glass; 1/2″ Insulated DSB Glass
TypeNormal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour
FinishGalvanized or Optional White Powdercoat
Size2″ or 3″
Gauge13 and 16-gauge
Counterbalance SystemCounterbalance System
TypeTorsion Spring, Tandem Shaft Torsion Spring, or Weight Counter-Balance
SpringsSpring Inner Diameter: 2-1/4″, 3-1/2″ or 5-1/2″; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powdercoat
ShaftsTube (13 gauge) or Solid (D-Shaft, 1″ Keyed)
Hinges11, 13, 14-Gauge or Hybrid
RollersStandard (2″ or 3″) or Heavy Duty (2″ or 3″)
FinishGalvanized or Optional White Powdercoat
LockInterior Slide Lock or Exterior Lock Bars
Seal(s)Jamb Seal
Hanger Angle11, 13-Gauge Galvanized or 13-Gauge White Powdercoated
Technical Information
Section and Panel Schedules
Door Width Number of Panels Door Height Number of Sections
Up to 8′ 6″2Up to 8′ 6″4
8′ 7″ - 11′ 11″38′ 7″ - 10′ 6″5
12′ 0″ - 14′ 2″410′ 7″ - 12′ 6″6
12′ 7″ - 14′ 2″7