Rakks/Rangine Corporation -Q-Standard - Wall Mounted Standards

DOWNLOADS

WALL MOUNTED STANDARDS Features

Rakks Wall Mounted Standards are made of extruded aluminum with precision channels that accept Rakks Shelf Support Brackets. Standards are available in six profiles to meet a variety of surface


Category: shelf | shelves | storage...

MasterFormat: Storage Specialties | Storage Assemblies | Mercantile Storage Assemblies...



Rakks/Rangine Corporation
330 Reservoir Street
Needham, MA 02494
Tel: (800) 826-6006
Fax: (781) 455-8702

sales@rakks.com

http://rakks.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Q-Standard - Wall Mounted Standards

WALL MOUNTED STANDARDS Features

Rakks Wall Mounted Standards are made of extruded aluminum with precision channels that accept Rakks Shelf Support Brackets. Standards are available in six profiles to meet a variety of surface and recess mounted applications to meet any shelving system’s need.

Standards can be specified in any length up to 12′. Standards come with drilled and countersunk holes to accept color matched mounting screws (No. 6 x 1-1/4” Philips flat-head), which are included.When properly installed, screw heads are flush with the back of the channel allowing shelf brackets to be positioned at any point.

WALL MOUNTED STANDARDS Requirements

We suggest a maximum spacing of 32″ for most applications. For heavy loads shorter spans may be required. Note: Specified spacing should be determined by the weight capacity of the brackets and the strength of the shelf.

Standards must be screwed into studs, blocking, or into wall anchors sized for No. 6 screws. Toggler® Brand AF-6 wall anchors are recommended. Brackets should be mounted at least 6″ from the top of the standard to better distribute the load. Shelf brackets can be mounted at the very bottom of a standard.

Q-Standard

A decorative profile designed for heavy-duty application.With Rakks Style Support Brackets (BR & TB) load capacities are increased by 25%. Supplied with 2” screws and twin mounting holes at each end.


See More


Specifications

WALL MOUNTED STANDARDS SPECIFICATIONS
MATERIAL:

6063-T6 extruded aluminum.

LENGTH:

Available in lengths up to 12′

FINISH:

Clear anodized, Black anodized, White powder-coat.
Custom anodized and powder-coated finishes available.

CHANNELS:

.28 opening accepts all styles of Rakks shelf support brackets.

CAPACITY:

Load capacities are determined by bracket type and size.

SCREW HOLES:

On center spacing is 12″ typical.

HARDWARE:

No. 6 x 1-1/4″ Philips Flat-Head color matched screws are included.

OPTIONS:

Access slots when required. Non-ferrous screws. Longer (2″) screws.
PVC Channel Cover snap into open channels in White, Black or Translucent finish.

ModelDescriptionApplication
SC-XXX“C” Style Wall StandardSurface or Recessed Mounted
SM-XXX“M” Style Wall StandardSurface Mount Only
SE-XXX“E” Style Wall StandardStud Mounted to Accept 5/8" Wallboard
SG-XXX“G” Style Wall StandardSurface Mounted Over 1/4" Mirror or Panels
SD-XXX“D” Style Wall StandardSurface Mounted - for Maximum Adjustment
SQ2-XXX“Q” Style Wall StandardSurface mounted - Heavy Duty
Compatible with BR and TB brackets only
ACCESS SLOTS

Access slots are cut into the face of the standards (2″ from bottom typical), allowing Rakks and Aria style brackets to be inserted or removed from the front. Required in recessed applications, or when the ends of the standards are not accessible.

CHANNEL NUT PLATES

Used for mounting light fixture, power strips, panels or other items to poles or standards. NP-0832 nut plate can be easily installed or removed from the front of the pole or standard. NP-0420 nut plate must slide into the end of the pole or into an access slot and should be used where a more secure attachment is required.

2″ SCREWS

Two inch color-matched screws are available for installation into double thick drywall.

Sweetsstakes