Rakks/Rangine Corporation -PS4 Single Support Pole

DOWNLOADS

Support Poles Features

Rakks support poles are made of extruded aluminum with channels designed to incorporate Rakks Shelf Support Brackets. Poles are available in 5 profiles to meet a wide range of storage and shelving applications.


Category: shelf | shelves | storage...

MasterFormat: Storage Specialties | Storage Assemblies | Mercantile Storage Assemblies...



Rakks/Rangine Corporation
330 Reservoir Street
Needham, MA 02494
Tel: (800) 826-6006
Fax: (781) 455-8702

sales@rakks.com

http://rakks.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


PS4 Single Support Pole

Support Poles Features

Rakks support poles are made of extruded aluminum with channels designed to incorporate Rakks Shelf Support Brackets. Poles are available in 5 profiles to meet a wide range of storage and shelving applications. The infinitely adjustable shelf brackets eliminate the need to level or shim poles. Anodized aluminum finishes provide a clean and chemically resistant finish.

Rakks Support Pole Components

Rakks Support Pole Components expand and enhance the configuration options of our pole-supported system. Using anchor brackets, spline connectors, and channel nuts, poles can be joined or supported in an infinite variety of combinations. Custom structures as well as office shelving and in store shelving can be easily created using readily available components.

PS4 Single Support Pole

Used for floor to ceiling or through counter applications in laboratories and retail stores. These poles can also be used to create framing and panel systems incorporating 1/4” decorative panels.


See More


Specifications

SUPPORT POLE MOUNTING CONFIGURATIONS
A. Spring compression with supporting wall (floor to ceiling) PL poles only. Shown with Rakks Style Brackets.
Note: loads must be rear facing against wall.
B. Threaded compression with or without supporting wall (floor to ceiling). Shown with Rakks Style Brackets.
Note: loads must be balanced or mount must be fastened at ceiling.
C. Tied back to a supporting wall with tie-bracket. Shown with Rakks Style Brackets.
Note: length of tie-bracket must equal shelf depth.
D. Integrated into counter or laboratory casework. Shown with Rakks T-Style Brackets.
Note: maximum recommended shelf height is 42” above counter.
E. Secured by anchor brackets and screws (floor to ceiling). Shown with Rakks Style Brackets.
F. L-Bracket tied to a supporting wall with mitered tie-pole and anchor brackets. Shown with Rakks L Brackets.
G. Rakks brackets tied back to a supporting wall with mitered tie-pole and anchor brackets. Shown with Rakks Style Brackets.
SUPPORT POLE SPECIFICATIONS
ModelDescriptionApplicationSpecification
PL-408Wall Storage Support Pole with Compression Spring or Tie Bracket HardwareUp to 11' Floor-to-Ceiling with 2' Extension. PL-408 95-99"
A, C, F, G
PL-409Wall Storage Support Pole with Compression Spring or Tie Bracket Hardware Up to 11' Floor-to-Ceiling with 2' Extension. PL-409 107-111"A, C, F, G
PC2-XXXCompression pole for L-bracketUp to 12' Floor-to-ceilingB, C, E, F, G
PC4-XXXCompression support poleUp to 12' Floor-to-ceilingB, C, E, G
PS4-XXXSingle support poleUp to 12' Floor-to-ceilingC, D, E, G
PD6-XXXDouble support poleUp to 16' Floor-to-ceilingB, C, D, E, G
ModelDescriptionApplicationSpecification
PL-HDWSpring Compression KitPL pole floor-to-ceilingFinish to match PL poles
PM-PC16Mount and InsertPC2/PC4 Threaded compressionBlack or clear 3" stem
PM-PD13Mount and InsertThreaded compression for PD6Black nylon only 3-1/2" stem
AB-0202Anchor Bracket 2" x 2"Pole-to-pole connections2 tapped holes
AB-0035Anchor Bracket 3-1/2" x 3-1/2"Pole-to-ceiling connections2 tapped & 2 through holes
AB-PCTie-Pole to Wall BracketDecorative bracket for PC2/PC41 tapped & 1 through hole
AB-PLTie-Pole to Wall BracketDecorative bracket for PL/PS41 tapped & 1 through hole
MT-XXXMitered Tie-PolePole-to-wall connectionProfile & length as specified
BT-XXXTie Bracket 1-1/4"Pole-to-wall connectionLength & finish as specified
BT2-XXTie Bracket 2"Pole-to-wall connectionLength & finish as specified
PG-PS4Grommet for PS4 Pole - BlackIntegrated configuration (Type D)Fits 2-1/2" diameter hole
PG-PD6Grommet for PD6 Pole - BlackIntegrated configuration (Type D)Fits 3-1/2" diameter hole
SP-001Spline ConnectorJoins poles end-to-endUse 2 per pole
SP-PC4Spline Connector for PC4Joins PC4 pole end-to-endUse 2 per pole
NP-0832Channel Nut w/ 8-32 screwInstalls from the front of poleSteel w/ 1 tapped hole
NP-0420Channel Nut w/1/4-20 screwInstalls from the end of poleSteel w/ 1 tapped hole
PET-XXXThreaded InsertInstalls into poles channelsLengths up to 8'
PC-SC-XXXPanel Framing Channel KitSupports panels between polesLength as specified
PH-G25Hinge Kit for 1/4" glass doorsAttach glass doors to polesSingle or double
PH-W75Hinge Kit for 3/4" wood doorsAttach wood doors to polesSingle or double
CC-096Channel Cover 96"Covers open channelBlack or transluscent
PL-BABracket AdapterCorner condition PL or PC2Finish to match poles
LB-025Lamp Bracket for 1/2" StemAttach lamp to poles or standardsClear or black anodized
EC-0102End Cap for PS4 PoleCovers end of poleBlack only
EC-0202End Cover for PD6Covers end of poleBlack only
PF-00B Bottom Pad for PL PoleProtects floor / covers endBlack or white
PF-00TTop Pad for PL-HDWProtects ceiling Black or whiteBlack or white
BJ-BBJ-Hangbar Bracket Bolt-OnAttach J-Hangbar to sides of PL or PC2 pole1-1/2" x 1-1/2" x 1/4"
w/ 2 holes
BJ-OL
BJ-OR
BJ-0C
J-Hangbar Offset
Bracket left/right
or center "T"
Attach to front of pole
left/right side
BJ-0C attaches to front of pole
where sections join
1-3/8" offset
MITERED TIE-POLE

Used to secure poles to a wall. Mitered tie-poles are available in any specified length. AB-0202 brackets are used for pole-to-pole connections. AB-PC or AB-PL brackets provide an attractive connection back to the wall. Note: if shelves do not touch the wall, additional bracing may be required to prevent side-to-side racking.

TIE-BRACKET

Used to secure any Rakks pole to a wall. Tie-brackets have a PVC flange at the end that is screwed to the wall. One tie-bracket should be located at the top of the pole. Additional tie-brackets can be added for greater stability. Note: tie-brackets must be specified so that shelves touch the wall.

THREADED INSERT

Used to create a threaded channel in any pole. Facilitates the installation of cabinets or other components using 1/4-20 screws. Secures into pole channel with set-screws.

SPRING COMPRESSION KIT

Used with PL poles for installation between the floor and ceiling. 1-1/8” x 1-5/8” x 11-1/2” rectangular tube slides over pole. Spring and spacers allow for up to 4″ overall adjustment. Rubber top and bottom pads protect ceiling and floor. Note: poles should be cut 3” shorter than the finished floor-to-ceiling height.

SPLINE CONNECTOR

Used to connect sections of poles when floor to ceiling heights exceed inventoried lengths. Splines slide into pole channels and are secured using four 10-32 set screws. Two splines are required for each connection.

THREADED MOUNTS

Install into inserts at the top and bottom of PC2, PC4 and PD6 poles for installation between floor and ceiling. These non-skid, non-marking mounts allow for up to 2″ overall adjustment. Note: poles should be cut 3″ shorter than the finished floor-to-ceiling height.

ANCHOR BRACKETS

One leg of these L-shaped brackets slides into the pole channel and is secured with 1/4-20 set screws. The other leg can be used to anchor poles to the floor, ceiling or wall. Use two AB-0035 brackets for pole-to-ceiling connections. AB-0202 brackets can be used to make 90-degree pole-to-pole connections.

GROMMETS

Facilitate installation of PS4 and PD6 poles in through-counter installations. These machined Delrin inserts are epoxied into round holes cut into counter tops. Eliminates need to cut square or rectangular holes.

PANEL FRAMING CHANNELS

Used with Rakks poles to support and frame 1/4” decorative panels. Framing channels are manufactured to order to fit any panel width up to 4′. They lock securely into the pole and are held in place by channel nut plates. Available in Clear, Black and White.

CHANNEL NUT PLATES

Used for mounting light fixture, power strips, panels or other items to poles or standards. NP-0832 nut plate can be easily installed or removed from the front of the pole or standard. NP-0420 nut plate must slide into the end of the pole or into an access slot and should be used where a more secure attachment is required.

CHANNEL COVERS

PVC extrusion snaps into pole channels to cover opening for improved sanitation and cleaning. Available in 8′ lengths in Translucent and
Black PVC.

POLE CORNER ADAPTER

This adapter screws into the side of the PL Series pole and accepts a shelf bracket. It should be used only in corner conditions.

J-BOLT-ON BRACKET & J-OFFSET BRACKET

Used to attach J-hangbar to poles. The bolt-on bracket screws to the side of PL or PC2 poles. The offset bracket locks into the front or back channel and provides a 1-3/8” offset. Available in left, right and center configurations.

Sweetsstakes