Rakks/Rangine Corporation -L Bracket Shelving System

DOWNLOADS

L Bracket shelving system Features

Offering a dramatic new look in pole-mounted shelving, the Rakks L Bracket system, US Patent #7,506,852, provides unparalleled design flexibility, strength and value.


Category: bookshelves | metal shelving | wall mounted shelving...

MasterFormat: Metal Storage Shelving | Fabricated Wood Storage Shelving | Wall-Mounted Standards and Shelving



Rakks/Rangine Corporation
330 Reservoir Street
Needham, MA 02494
Tel: (800) 826-6006
Fax: (781) 455-8702

sales@rakks.com

http://rakks.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


L Bracket Shelving System

L Bracket shelving system Features

Offering a dramatic new look in pole-mounted shelving, the Rakks L Bracket system, US Patent #7,506,852, provides unparalleled design flexibility, strength and value. Available in floor to ceiling and wall-supported configurations, this new design features quick and infinite shelf adjustment utilizing one hidden screw. L-brackets support wood, glass or aluminum shelves up to 24” deep. Cabinets can be easily attached to the poles to create attractive wall storage units and room partitions. The L-Bracket system is stocked in clear anodized, black anodized and white powder-coat finishes.


See More


Specifications

SLANTED L-BRACKET

L-Style brackets can be manufactured to lock in at any angle. This configuration is ideal for literature and magazine display. Note: slanted brackets must be ordered in matching pairs.

CUSTOM & OFFSET NOTCHED BRACKET

L-Style brackets can be manufactured in asymmetric configurations. Cantilever Brackets are ideal for supporting work surfaces. Note: Offset brackets must be ordered in matching pairs.

CABINET MOUNTING SCREWS

1⁄4-20 screws can be used to mount cabinets to poles. Use 1-1/8” screws for cabinets with 3⁄4” thick sides. Instructions showing how to install cabinets to poles can be found here.

BRACKET NOTCH FOR SHELF LIP

These made-to-order notched brackets are used with aluminum shelves for slanted literature and product display. They can be manufactured for any shelf depth and angle. 1-1/4″ shelf lip bar fits into the notched brackets retaining the shelf and creating an attractive lip.

PC2 SUPPORT POLE

Used for creating shelving units with or without a supporting wall. Adjustable threaded mounts allow pole to be installed under compression between floor and ceiling. Threaded side channels accept 1⁄4” -20 screws to mount L Brackets or cabinets. C channels accept all other Rakks brackets and pole accessories.

L BRACKETS

L-Brackets, US Patent #7,506,852, attach to PC2 poles with one 1⁄4” -20 screw. When used with 3⁄4” thick shelves the mounting hardware is hidden. Available for shelves from 8” to 24” deep in 2” increments. Wood shelves can be screwed to the brackets using pre-drilled and counter-sunk holes. Model BL-XX (XX denotes shelf depth in inches).

RETAINING PIN OPTION

L-Brackets can be ordered with retaining pins on each end to accommodate Rakks extruded aluminum shelves.

MITERED TIE-POLES

Mitered tie poles can be used in applications where floor to ceiling installation is not practical or desired. Pole-to-pole and pole-to-wall connections are made using anchor brackets secured with set screws. Tie-Pole kits are sized to accommodate all L-Bracket sizes. Model MT-PC2-XX (XX denotes shelf depth in inches).

THREADED MOUNT

Adjustable mounts install into threaded inserts at the top and bottom of PC2 poles. These non-marking mounts adjust to provide floor-to-ceiling compression. Top mounts have two holes to facilitate additional anchoring into ceiling. Note: poles should be cut 3” shorter than the finished floor-to-ceiling height.

L-BRACKET SHELVING SYSTEM SPECIFICATIONS
ModelDescriptionConfigurationsLengths
PC2-XXXPC2 Support PoleFloor to ceiling or tied back to wallLengths up to 144"
L-BRACKET
ModelDescriptionLengthWidthDepthHardwareCapacity
BL-08L-bracket for 8” Shelf8"7/8"1-1⁄2”1⁄4-20 x 1⁄2” flat head150 lbs/pair
BL-10L-bracket for 10” Shelf10"7/8"1-1⁄2”1⁄4-20 x 1⁄2” flat head150 lbs/pair
BL-12L-bracket for 12” Shelf12"7/8"1-1⁄2”1⁄4-20 x 1⁄2” flat head150 lbs/pair
BL-14L-bracket for 14” Shelf14"7/8"1-1⁄2”1⁄4-20 x 1⁄2” flat head150 lbs/pair
BL-16L-bracket for 16” Shelf16"7/8"1-1⁄2”1⁄4-20 x 1⁄2” flat head150 lbs/pair
BL-18L-bracket for 18” Shelf18"7/8"1-1⁄2”1⁄4-20 x 1⁄2” flat head150 lbs/pair
BL-20L-bracket for 20” Shelf20"7/8"1-1⁄2”1⁄4-20 x 1⁄2” flat head150 lbs/pair
BL-22L-bracket for 22” Shelf22"7/8"1-1⁄2”1⁄4-20 x 1⁄2” flat head150 lbs/pair
BL-24L-bracket for 24” Shelf24"7/8"1-1⁄2”1⁄4-20 x 1⁄2” flat head150 lbs/pair
COMPONENTS & L-BRACKET OPTIONS
ModelDescriptionApplicationSpecification
BL-OFFSETOffset Option
for L-Bracket
Supports varying shelf depthsLength and offset
as specified
CAB-HDWMounting HardwareAttaches cabinets to poles1/4-20 screws 3/8"
plus thickness of side
BMP-1Stick-on Shelf RestsCushion shelves and keep them from slidingUse two or more per bracket
BL-RPRetaining Pin OptionSecures aluminum shelf to bracket5/32" steel pins located at each end
BL-SLANTEDSlanted Option
for L-Bracket
Merchandising or displayLength and angle as specified
MITERED TIE BRACKETS
ModelDescriptionLengthIncluded with Kit
PC2-MT-08Mitered Tie Pole Kit for 8” Shelf4 3⁄4” to frontAB-0202, AB-PC4 & Cutting
PC2-MT-10Mitered Tie Pole Kit for 10” Shelf5 3⁄4” to frontAB-0202, AB-PC4 & Cutting
PC2-MT-12Mitered Tie Pole Kit for 12” Shelf6 3⁄4” to frontAB-0202, AB-PC4 & Cutting
PC2-MT-14Mitered Tie Pole Kit for 14” Shelf7 3⁄4” to frontAB-0202, AB-PC4 & Cutting
PC2-MT-16Mitered Tie Pole Kit for 16” Shelf8 3⁄4” to frontAB-0202, AB-PC4 & Cutting
PC2-MT-18Mitered Tie Pole Kit for 18” Shelf9 3⁄4” to frontAB-0202, AB-PC4 & Cutting
PC2-MT-20Mitered Tie Pole Kit for 20” Shelf10 3⁄4” to frontAB-0202, AB-PC4 & Cutting
PC2-MT-22Mitered Tie Pole Kit for 22” Shelf11 3⁄4” to frontAB-0202, AB-PC4 & Cutting
PC2-MT-24Mitered Tie Pole Kit for 24” Shelf12 3⁄4” to frontAB-0202, AB-PC4 & Cutting
Sweetsstakes