Rakks/Rangine Corporation -EH-1818 - Surface Mount - Counter Support Bracket

DOWNLOADS

Counter Support Brackets Features

Rakks Counter Support Brackets provide a practical, low-cost and easy to install alternative to full-height laminated panel supports for counter mounting and counter installation.


Category: counters | countertop | countertop support brackets...

MasterFormat: Casework | Countertops



Rakks/Rangine Corporation
330 Reservoir Street
Needham, MA 02494
Tel: (800) 826-6006
Fax: (781) 455-8702

sales@rakks.com

http://rakks.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


EH-1818 - Surface Mount - Counter Support Bracket

Counter Support Brackets Features

Rakks Counter Support Brackets provide a practical, low-cost and easy to install alternative to full-height laminated panel supports for counter mounting and counter installation. They support counters up to 30″ deep while providing open space under the entire length-improving both handicap accessibility and ergonomics. Counter Support Brackets are available in either surface or flush-mounted configurations.

Rakks Sill Supports provide low-profile support or bracing for shelves or sills.

EH-1818

For counter up to 25” deep, brackets should be screwed into blocking or studs at a maximum spacing of 48”. 2” wide mounting surface provides extra support where counter sections join.


See More


Specifications

COUNTER SUPPORTS SPECIFICATIONS
MATERIAL:

6063-T6 extruded aluminum.

CONSTRUCTION:

TIG welded along both 45° mitered sides and across the back. All sharp edges ground and deburred.

HARDWARE:

5/16″ holes accept 1/4″ screws.

INSTALLATION:

48″ maximum spacing into studs or blocking or as specified by counter top supplier.

FINISH:

Stocked in mill (unfinished) aluminum, off-white powder-coat, black powder-coat, primed or clear
anodized finishes.

OPTIONS:

Inside Wall Flush Mount Configuration
Grommet
Custom Sizes and Finishes

ECLIPSE COUNTER SUPPORT SPECIFICATIONS
MATERIAL:

6063-T5 extruded aluminum
Machined aluminum ends

CONSTRUCTION:

TIG welded across the back. All sharp edges ground and deburred.

HARDWARE:

#14 x 2″ screws - included for key hole mounting

INSTALLATION:

32″ maximum spacing into studs or blocking or as specified by counter top supplier.

FINISH:

Stocked in black or clear anodized finishes.

OPTIONS:

Face Plate Mounting

SILL SUPPORTS SPECIFICATIONS
MATERIAL:

6061-T6 extruded aluminum.

CONSTRUCTION:

Cut and sanded extrusions drilled with four 5/16″ holes.

FINISH:

Stocked in mill aluminum and off-white powder-coat.

OPTIONS:

Custom Finishes

ModelHeightDepthMaterialGaugeCapacityApplication
EH-120912"9"2" x 2" T3/16" Top
1/4" Web
650 lbs / Bracket13" Counters
EH-121212"12"2" x 2" T3/16" Top
1/4" Web
650 lbs / Bracket18" Counters
EH-181818"18"2" x 2" T1/4"450 lbs / Bracket24" Counters
EH-182418"24"2" x 3" T3/16"450 lbs / Bracket30" Counters
EH-1230 PSTypically 31" or as Specified30"2" x 3" T3/16"450 lbs/ Bracket36" Counters
EH-1416B14-1/4"15-3/4"2" x 3" T3/16"450 lbs / BracketBench Seating
EH-1209-FM12"11"2" x 2" T &
2" x 2" L
1/4"430 lbs / BracketInside Wall
Flush Mount
EH-1212-FM12"14"2" x 2" T &
2" x 2" L
1/4"430 lbs / BracketInside Wall
Flush Mount
EH-1818-FM18"20"2" x 2" T &
2" x 2" L
1/4"300 lbs / BracketInside Wall
Flush Mount
EH-1824-FM18"26"2" x 3" T &
2" x 2" L
3/16"
1/4"
300 lbs / BracketInside Wall
Flush Mount
EH-1416B-FM18"14 1/4" x 17 3/4"2" x 3"x.1883/16"300 lbs.Inside Wall
Flush Mount
EC-08088-5/8"8-5/8"1-1/4"W x 1-1/4"H x 1/8" Hollow Extrusion125 lbs / Bracket12" Counters
EC-08128-5/8"11-5/8"1-1/4"W x 1-1/4"H x 1/8" Hollow Extrusion100 lbs / Bracket18" Counters
FB-04043.5"3.5"6061 Aluminum1/4"120 lbs / Bracket5" Sills
FB-04064"6"6061 Aluminum3/8"150 lbs / Bracket10" Sills
ModelDescriptionApplicationSpecification
EH-FP22/FP23Stick-on Face-plate CoverTo finish drywallFor 2x2 and 2x3
EH-SLANTEDSlanted Option
for Counter Support
Work areasLength and
angle as specified
EH-VANITYCustom Vanity EnclosureWall mounted sinksFully dimensioned
drawing required
EH-PGGrommet OptionPer wire management5/8" diameter opening
RADIUS END OPTION

Used in applications requiring additional safety and refinement beneath a counter or work surface. Available in 12″ x 9″, 12″ x 12″, 18″ x 18″ and
18″ x 24″ surface mount and flush mount configurations. Call for additional information and pricing.

GROMMET OPTION

Used for under-counter wire management. Rubber grommet with 5/8″ diameter opening can accommodate an RJ-45 connector or wire ties.

Counter Support Brackets with grommets are Made-to-Order and Non-Returnable.

EHV VANITY SUPPORTS - MAKE-TO-ORDER

EHV Vanity Supports can be easily customized to meet specific project or accessibility requirements. See “A” through “F” to specify your requirements. Custom Vanity Supports are not returnable.

FACE PLATES (EH-FP23, EH-FP22)

Designed to work with Flush-mount counter supports, this adhesive backed plate fits over the supporting arm of the bracket and eliminates the need to patch and fill the drywall.

CUSTOM SLANT MOUNT

Used in applications requiring an angled surface, any EH bracket can be ordered in the slant mount configuration. Please specify size and angle.

MOUNTING PLATE (EC-MP)

Designed so that the Eclipse Bracket can be mounted under a previously installed surface. Included are 4 #8 x 1-1/2″ screws.

Sweetsstakes