Home / Plasti-Fab / 1. Plastispan® EPS Insulation
2_defaultImage.jpg image

Plasti-Fab -PlastiSpan® EFS Insulation

DOWNLOADS

PlastiSpan EFS insulation used in EIFS applications covers the outside of the building so that the structure is isolated from the wide temperature fluctuations of the climate. This reduces expansion and contraction of the structure and stabilizes interior temperatures.


Category: commercial insulation | foam board insulation | residential insulation...

MasterFormat: Thermal Protection | Thermal Insulation | Board Insulation...


View Product Details From Manufacturer


Plasti-Fab
#300, 2891 Sunridge Way NE
Calgary, AB T1Y 7K7
Tel: (888) 446-5377

mailbox@plastifab.com

https://www.plastifab.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


PlastiSpan® EFS Insulation

PlastiSpan EFS insulation used in EIFS applications covers the outside of the building so that the structure is isolated from the wide temperature fluctuations of the climate. This reduces expansion and contraction of the structure and stabilizes interior temperatures. When using PlastiSpan EFS insulation in EIFS applications it provides a complete exterior blanket of insulation in a simpler manner than application of insulation on the interior.

PlastiSpan Insulation is code listed with CCMC 12424-L and meets the requirements of CAN ULC S701.1, Type 1.

PlastiSpan EFS insulation is manufactured under a stringent quality control program to meet the requirements of EIFS manufacturers that includes third party certification of material properties.

PlastiSpan EFS insulation can be supplied to any thickness required to provide specified thermal resistance (R-Value) and special shapes can be provided that will create the style or form needed for the building.

Why PlastiSpan® EFS Insulation

  • Meets all building code requirements
  • Thermal resistance - RSI 0.65/25 mm (R-value 3.75/inch)
  • Most cost-effective insulation per R-value
  • Closed cell insulation resists moisture
  • Easy to cut and install
  • Maintains R-value
  • Can be used in Retrofit & new construction


See More


Specifications

Material Properties of PlastiSpan® EFS
Material Property Test Method Units Property Values
Density
Minimum		C303 or D1622pcf0.90
Thermal Resistance
Minimum		C177 or C518ft2•hr•°F/BTU
ft2•hr•°F/BTU		75°F | 3.60
40°F | 4.00
Water Vapour Permanence
Maximum		E96perms5.0
Dimensional Stability
Maximum		D2126% linear change2.0
Water Absorption
Maximum		C272% By Volume4.0
Flexural Strength
Minimum		C203psi25
Compressive Resistance
Minimum @10% Deformation		C165 or D1621psi10
Limiting Oxygen Index
Minimum @10% Deformation		D2863% by volume24
Additional Material Properties for PlastiSpan EFS Insulation
Water Absorption
Maximum		C272% by volume2.0
Dimensional Stability
Maximum		D2126% linear change0.5
Tensile Strength
Minimum		D1623psi15
Standard Dimension per ASTM E2430
Length48 inches
Width24 inches
Thickness3/4 inch to as specified
Dimensional Tolerences ASTM E2430
Length±1/16 inch (±1.6 mm)
Width±1/16 inch (±1.6 mm)
ThicknessMinimum: 3/4 inch (20 mm)
Maximum: As specified		±1/16 inch
±1/16 inch
SquarenessWhen measured on the large flat face from one corner to the opposing corner, dimensional variations shall not exceed 1/32 inch in 12 inch
Edge TruenessWhen measured with a straight edge, edges shall not deviate more than 1/32 inch in 12 inch
Face FlatnessWhen measured across the face with a straight edge, maximum deviation from the straight edge shall not exceed more than 1/32 inch
Storage Condition Average Temperature Minimum Storage Period
Low Pentane (<4.5% pentane) Raw Materials and Vacuum Mould Technology
Plant AgingAmbient Temperature 68 °F and RH12 Days
Full Pentane (nominal 6% pentane) Raw Materials and Vacuum Mould Technology
Plant AgingAmbient Temperature 68 °F and RH18 Days
Full Pentane (nominal 6% pentane) Raw Materials and Non-Vacuum Mould Technology
Plant AgingAmbient Temperature 68 °F and RH42 Days
Heat AgingElevated Temperature 140 °F5 Days
Material Properties ASTM E84
Flame Spread Index20
Smoke Developed Index300