PAC-150 90° Single Lock
PAC-150 standing seam metal roofing panels combine semi-structural metal panel performance with architectural roofing panel aesthetics. PAC-150 roofing coil is corrective-leveled to provide superior panel flatness. An optional factory-applied sealant bead can be applied for additional weather resistance. Maximum panel length is limited when factory or shop-formed but virtually unlimited when field-formed; minimum panel length is approximately 4’.
PAC-150 roofing panels feature a 1.5” leg height which requires mechanical field seaming to either 90° or 180° depending on the project’s uplift requirements. Panels have a concealed-fastener clip designed to allow for maximum design flexibility. For further details, please contact Petersen Aluminum.
This panel combines an attractive thin-rib profile with superior structural performance. PAC-150 panels are designed for application over a wide variety of substrates in slopes as low as 1/2:12 pitch. PAC-150 roofing panels are available in a wide variety of widths from 12” to 20”. Materials available include 22 and 24 gauge steel; .032 and .040 aluminum.
The PAC-150 electric seamer can run in only one direction at 180°; manual seaming of the seam to 90° is an option when uplift limitations will allow. The PAC-150 panels should be installed from left to right to ensure the seamer travels down slope. Do not expect the seamer to travel up slope easily on a roof pitch greater than 4:12.
The PAC-150 panels can be curved to a minimum radius of 10’. Curving can be done in the field or at the factory depending on the radius and length of the panel. For details about curving capabilities, please contact the Acworth, Ga., Petersen Aluminum factory.Materials: 38 stocked metal colors (24 gauge steel) 15 stocked metal colors (22 gauge steel) 36 stocked metal colors (.032 aluminum) 20 stocked metal colors (.040 aluminum) Galvalume Plus available
- 30 year non-prorated finish warranty
- Available in four pan variations; smooth, striated, pencil rib or flat rib. Check locally for panel condition availability
- Corrective-leveled coil
- Maximum panel length of 64’ when factory or shop-formed but virtually unlimited when field-formed
- Mechanically seamed in the field to 90°