Tiger Industrial Solid Aluminum Slide Gate

The solid aluminum screening incorporates a very modern tubular design. The aluminum tongue and groove planks set horizontally or vertically to match your facilities’ exterior finishes. The tongue and groove planks are very attractive with chamfered corners and middle structural indentation.

Design: Tongue & groove

Height: Heights may vary based on design. Standard heights up to 8’

Widths: Standard widths are 10’, 12’, 16’ & 20’. However, we offer unlimited opening sizes based on our engineering.

Frame: 4” x 2” rectangular outer frame & 3″ x 3″ angle inner frame, forming a bank vault-like door.

Plank Options: Aluminum (5 ½” wide planks, 1” thick)

PalmSHIELD Tiger slide gate series combines the appeal of PalmSHIELD’s architectural screening options to a commercial cantilever slide gate. This is a uncanny pairing as cantilever slide gates are truly suspended and cantilevered through the opening, not utilizing any ground supports or wheels. This means that the structural design of the gate itself must be considerable, supporting both the weight of the architectural panels and the wind load created.

PalmSHIELD Tiger commercial and industrial slide gates provide a wide array of PalmSHIELD infill options including composite wood, vinyl, aluminum, louvers, perforated and wire mesh. The architectural infill panels are installed into the cantilever slide gate to provide continuity with adjoining screening. Unlike any other commercial slide gate manufacture, PalmSHIELD Tiger commercial slide gates are sweep blasted and powder coated. We offer an endless number of colors.

Unlike standard cantilever slide gates, the PalmSHIELD Tiger series incorporates a much larger structural framework. The vertical framework begins with a 4” x 2” tubular outer framework encapsulating a 3” x 3” interior angle or 2” x 3” tubular U-shaped picture frame. This is an industrial and commercial gate design when aesthetics are critical. The Tiger series utilizes a upper single or double track design based on the weight and length of the opening. The bottom guide is no less than a 5” x 2” tubular member supporting the gate against wind load.

PalmSHIELD Tiger gates are each custom engineered to your tallest and widest openings. PalmSHIELD applies a series of engineering principles, accounting for the effects of the cantilevered load and wind load. PalmSHIELD has successfully built tens of thousands of industrial and commercial gates over the last thirty years.

• Structural slide gates designed specifically support the weight and wind load of infill
• Slide gates available in cantilevered or slide gates.
• Proven engineering principles employed to support endless sizes of cantilevered gates.
• Powder coated framework. All infill options available.
• Architectural slide gates blend perfectly into your screening system

Widths: Standard widths are 10’, 12’, 16’ & 20’. However, we offer unlimited opening sizes based on our engineering.

Heights: Standard heights are 6’, 8’, & 10’. However, we offer unlimited heights sizes based on our engineering.

Counterbalance: On cantilever slide gates, it is equal to half the opening width. On overhead and ground track systems, add 10% to the opening width.

Frame: All of our gates are engineered to your type, size and width.

See More

See Less