Model DFGB-01 Metal Door - Bullet-Resistant
Door with 11 x 11 Vision Lite
Maximum Fire Rating:
Closers | Exit Devices | Hinges | Locks
Doors and frames are formed from bullet resisting steels, suitably reinforced as required to meet UL test criteria. Frame corners are mitered and welded. Both doors and frames are supplied with all necessary internal hardware reinforcements. Single rabbeted frames are supplied with adjustable mortar anchors, but may be optionally supplied with masonry anchor shields and bolts for insertion in pre-punched and dimpled mounting holes. Double rabbeted frames are also available. Customer is to specify.
Assemblies are supplied with UL-Listed Bullet-Resisting glass, non-tinted, of appropriate thickness and type to achieve the UL listing specified. Custom sized vision opening are available upon request. Window size must be specified at time of order.
Assemblies are listed by Underwriters Laboratories,Inc. (UL) as being bullet resisting assemblies in compliance with Standard for Safety-UL 752, Bullet-Resisting Equipment for the following threat levels:
UL Level 1
UL Level 2
UL Level 3
UL Level 4
UL Level 5
UL Level 6
UL Level 7
UL Level 8
Desired threat level must be specified at time of placement of order.
Both door and frame are supplied with prime painted finish.
All bullet resistant rated doors and frames may also be UL fire-rated for up to three hours under UL standard 10B fire tests of door assemblies.
Desired fire rating must be specified at time of order.
Door and frame are reinforced, mortised and appropriately drilled and tapped for installation of hardware, If hardware is included, it is supplied in a separate shipping carton, normally individually for each opening.
Standard Hardware Set For Interior Doors:
Standard Hardware Set For Exterior Doors Same as above, except for:Standard Hardware Set For HPR (High Power Rifle) Rated Doors Same as above, except for:Options:
1½ pair Hager hinges, Model BB1168; 5" x 4½" NRP (non-removable pin), with US26D (dull chrome) finish.
One Corbin Russwin Mortise Lockset Model ML 2057 with US26D (dull chrome) finish.
One Norton 1604H x Al surface closer.
Single door and frame orders are shipped in three appropriate packages comprising of frame and reinforcing spreader, the door and if included, the hardware packages. Multiple orders are bunched" and crated. The frame is installed using either the supplied bolts and expansion shields or adjustable masonry anchors. If bolt-in frame was specified, the punched and dimpled holes in the frame are used as templates for drilling holes in the existing wall. Hinges are applied to the door. The door is lifted into the opening and shimmed. Screws are then applied through the hinges to the frame. The lockset is mounted to the door in prepared locations. The door and frame must now be drilled and tapped per supplied template for installation of closer.