Overhead Door Corporation -FireKing® Model 634 Fire-Rated Service Doors

DOWNLOADS

FireKing® Model 634

Fire-rated service door model 634 is a large fire door with UL, ULC and FM ratings for 1-1/2 hr, 3hr labels. Additional 4 hr UL and oversized labels available. Doors over 18 feet high must be certified by FM.


Category: wind rated doors | wind resistant doors | wind-rated doors...

MasterFormat: Specialty Doors and Frames | Coiling Doors and Grilles | Overhead Coiling Doors...



Overhead Door Corporation
2501 South State Highway 121
Suite 200
Lewisville, TX 75067
Tel: (800) 929-3667
Fax: (972) 906-1499

National_Accts@Overheaddoor.com

https://www.overheaddoor.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


FireKing® Model 634 Fire-Rated Service Doors

FireKing® Model 634

Fire-rated service door model 634 is a large fire door with UL, ULC and FM ratings for 1-1/2 hr, 3hr labels. Additional 4 hr UL and oversized labels available. Doors over 18 feet high must be certified by FM. The FireKing® Model 634 rolling fire-rated service door offers superior protection wherever a listed fire door is required.

Additional safety and protection features are available, including: Fire Sentinel® time-delay release device, FireLite® vision lites, smoke detectors, horns and strobes.


Slat selection and finishes

Fire door slats are available in curved or flat profile in either galvanized or stainless steel. Galvanized slats are finished with a rust-inhibitive, roll-coating process that incorporates baked-on prime paint, and a baked-on polyester top coat of gray, tan, white or brown. Stainless steel slats are manufactured with a No. 4 brushed finish.

Features

Standard max width

41’2” (12548 mm)

Standard max height

25’4” (7722 mm)

Curtain

Painted galvanized / stainless steel

Slat profile available in curved or flat.

Standard finish available in gray, tan, white or brown

Guides

Three structural steel angles

PowderGuard® Weathered finish with black powder coat.

Labels available for masonry or non-masonry applications

UL/ULC 1-1/2 hr (FM is optional)

UL/ULC 3 hr (FM is optional)

UL 4 hr

UL oversized door (FM is optional)

Mechanical auto resettable hoist (non-motorized)

Enables easy drop test and reset of fire door in seconds

Fusible link for added safety

Separates at 165°F (74°C) to automatically close the door in case of fire

Viscous governor technology

Controls rate of door descent during a fire while reducing noise and vibration for quieter door operation

Innovative planetary gear design

Ensures years of reliable service and drop-out performance

Warranty

2-year material and workmanship

Fire doors are in compliance with:

National Fire Protection Association (NFPA-80)

Underwriters Laboratories (UL & ULC)

New York City (MEA)

State of California (CSFM)

Door Options

  • Factory Mutual (FM) label optional
  • Operation: push-up, chain hoist, crank and electric motor (RHX® or RSX®)
  • Fire Sentinel® time-delay release device
  • FireLite® vision lites
  • UL-listed brush-type smoke seals
  • Flame baffle system (required for FM label)
  • Smoke detectors
  • Horns and horns with strobes
  • Cylinder locking bottom bar with mortise cylinder
  • Wind load (FBC, TDI, Miami-Dade)
  • PowderGuard® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification.
  • PowderGuard® Zinc and PowderGuard® Weathered finishes


See More


Specifications

Colors
WhiteGrayTanBrown

Actual door color may vary from the digital representation shown here. Actual color samples are available by request through your Overhead Door™ Distributor.

PowderGuard® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification. PowderGuard® Textured finish, a thicker, more scratch resistant coat, is available in 11 colors providing enhanced scratch resistance as well as aiding in hiding the dirt and blemishes that often occur in commercial environments.