Overhead Door Corporation -Commercial Door Operator RMX®

DOWNLOADS

The UL 325 2010 certified RMX® medium-duty commercial operator is designed for quicker installation and hassle-free operation. The RMX® offers convenient features and technical innovations found nowhere else in a medium-duty operator.


Category: coiling door operators | door operators | roll-up door operators...

MasterFormat: Panel Doors | Hardware | Door Hardware...



Overhead Door Corporation
2501 South State Highway 121
Suite 200
Lewisville, TX 75067
Tel: (800) 929-3667
Fax: (972) 906-1499

info@overheaddoor.com

https://www.overheaddoor.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Commercial Door Operator RMX®

The UL 325 2010 certified RMX® medium-duty commercial operator is designed for quicker installation and hassle-free operation. The RMX® offers convenient features and technical innovations found nowhere else in a medium-duty operator.

Features

Mounting

A wide variety of mounting options are available to fit any application including:
Sectional doors: Trolley for use on standard doors up to 14' high and 620 lbs. Trolley models available with or without brake. Jackshaft models available with and without hoist for doors up to 16' high and 620 lbs. Jackshaft and hoist models only available with brake standard.

Rolling steel doors: Jackshaft models available with and without hoist for use with rolling steel doors or grilles up to 16' high and 580 lbs. Brakes are standard on rolling steel models.

Warranty

2-year or 20,000 cycle limited warranty

Motor

Single-phase voltages of 115V AC and 230V AC in ½ horsepower

External radio hookups

Terminals are provided inside control enclosure to allow an optional 3-wire radio system to be connected

Drive reduction

Primary reduction is SuperBelt®, an auto tension poly-V flex belt that does not require adjustment. Secondary reduction is by chain and sprocket

Direct coupling

Provides fast, easy installation with fewer parts and better structural support. Prevents chain slacking. Available on sectional side mount jackshaft and hoist units

Mechanical brake system

Solenoid actuated band brake

Display

16-character LCD (Liquid Crystal Display) provides easy-to-read set-up and diagnostics with backlight for low-light conditions

Cycle counter

Displays the total cycles logged over the operator’s lifetime, to support warranty and service functions

Adjustable shaft

Output shaft can be moved from one side to the other, providing flexible installation options on sectional side mounting

Control system

On-board open/close/stop buttons make testing simple

Independent timers

Automatic maximum run timer stops the door moving in either the open or close direction if preset run time is exceeded, allowing for inspection

Options

  • RMX® trolley: For use on standard lift doors up to 14' high and 620 lbs.
  • RMX® Jackshaft with and without hoist - sectional door: For use on vertical lift, lift clearance sectional door up to 16' high and 620 lbs.
  • RMX® Jackshaft with and without hoist - rolling service doors and grilles: For use with rolling steel doors or grilles up to 16' high and 580 lbs. in weight


See More