Anchor-Tite Drip Edge - Pitched Roof Flange
Anchor-Tite Drip Edge combines custom engineering and superior performance with an attractive appearance. The patented design of our extruded aluminum anchor bar securely terminates the EPDM, PVC, or TPO membrane, providing protection superior to any other shop-fabricated drip edge. The pitched roof flange allows for a non-strip in drip edge option for sloped roofs up to 4”/12” pitches when compared to conventional drip edge. With this unique design, it is easy to install and cuts down on the labor, while still providing the water drainage you need to protect your roof.
Features and Benefits
Warranty
The Lifetime, 215 MPH Anchor-Tite Wind Warranty is available on all Metal-Era manufactured Anchor-Tite products. It covers replacement or repair of any portion of the system that has failed due to a defect in Metal-Era supplied materials. The warranty covers the roof edge for the lifetime of the roof on which it was originally installed.
Testing
- Tested per ANSI/SPRI/FM 4435/ES-1 Standard to comply with the International Building Code.
- Factory Mutual approved for wind uplift protection.
Standard Sizes
Sizes range from 3" up to 7 ½" face heights to accommodate multiple nailers and coverage requirements.
Accessories
Factory fabricated miters provide a cleaner, more aesthetically pleasing appearance. This eliminates the need for field fabrication, providing time and labor savings.
Also Included
All splice plates and fasteners are included and will arrive to the job site with the product.
Anchor Bar Protection
The patented, extruded aluminum anchor bar securely terminates the membrane. This provides protection unlike any other manufactured or shop-fabricated edge. The anchor bar is readily available to dry-in the roof structure.
Available Materials
Covers can be manufactured in 24 ga. steel and .040" aluminum.
Colors
Choose among a wide range of standard colors and finishes that meet your job requirements. A 30-Year Kynar 500® Finish Warranty is included on coil-coated standard colors. Custom post-coated Kynar 500® colors are available with an included 10-Year Kynar 500® Finish Warranty or a 20-Year Kynar 500® Finish Warranty is available upon request.
Anodized finishes are also available and come with a 5-year warranty (no warranty available for coil anodized finishing; Post-coat/Class 1 Batch Anodized is available with a 5-year warranty with an option to increase to a 10-year warranty for an upcharge).
Competitively Priced
The installed cost rivals even light gauge roof edge systems fabricated locally or in a roofer’s shop.
Custom Capabilities
Radius and specially fabricated products are available to meet the unique needs of each project.
Efficient Design
Provided in 12'-0" lengths with pre-punched holes for quicker installation and lower labor costs. The fastening holes are slotted to allow for proper thermal movement of the materials and ensure correct fastener placement and spacing.
Low profile roof flange allows for water drainage as needed for drip edge conditions.
Reuseable Materials
When reroofing, the anchor bar can be removed, cleaned and reinstalled at any time without compromising its strength and appearance.
Watertight
Non-penetrating design eliminates the need for stripping-in or heat welding that is typical of many other roof edge designs. Watertight integrity is not compromised by improper flashing procedures, failed adhesives or lap sealants.
See More
See Less