Maxwell Products, Inc. -Gap Patch 330 Permanent Pothole Repair

DOWNLOADS

GAP Patch 330 is a robust, hot-applied, permanent repair for potholes in highways and municipal streets.


Category: asphalt paving repair | concrete paving repair | pavement...

MasterFormat: Flexible Paving Repair | Rigid Paving Repair | Bases, Ballasts, and Paving...



Maxwell Products, Inc.
650 South Delong St.
Salt Lake City, UT 84104
Tel: (800) 266-2090

contact@maxwellproducts.com

https://maxwellproducts.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Gap Patch 330 Permanent Pothole Repair

GAP Patch 330 is a robust, hot-applied, permanent repair for potholes in highways and municipal streets. Able to be applied in winter weather under imperfect conditions, GAP Patch 330 is ideally suited for concrete and asphalt pavement repairs of at least two inches deep and between one half square foot and 10 square feet in area. Patch material is hot-applied and formulated with flexible, polymer-modified asphalt (designed to accommodate ground movement) and durable, engineered aggregates (capable of bearing heavy loads and traffic).

Application

Read and follow application instructions before use. This product must be indirectly heated using a oil jacketed kettle. Material must be constantly agitated to keep aggregate evenly suspended. Remove standing water and debris from the pothole and reduce moisture content in the top 2 inches of the repair to 12% or less.
Maximum safe heating temperature: 390°F (204°C).
Recommended application temperature: 320°F (193°C).

Warranty

Maxwell Products, Inc. warrants that our products will be free from defects in material or workmanship and will conform to our published specifications at the time of shipment. In the event our products fail to conform to our published specifications at the time of shipment, we will, at our expense and sole option, replace our defective product or give you a full or partial refund of the purchase price from Maxwell Products. Claims must be made within three (3) months of the date of purchase. MAXWELL PRODUCTS HEREBY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY AND ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

Available in fully meltable packaging.


See More


Specifications

Aggregate
Aggregate PreparationWashed, Clean & Dried
Sieve Analysis : 3/4" sieve, passing : MANUFACTURER'S CERTIFICATION95% min
Sieve Analysis : No. 4 sieve, passing : MANUFACTURER'S CERTIFICATION15% max
Sieve Analysis : No. 16 sieve, passing : MANUFACTURER'S CERTIFICATION3% max
Fractured Face : 2 or more faces : MANUFACTURER'S CERTIFICATION85% min
Binder
Cone Penetration : 77°F (25°C), 150g, 5s : ASTM D532970 dmm max
Softening Point : ASTM D36200°F (93°C) min
Flexibility : 1 in (25mm) mandrel, 90 deg bend, 2s : ASTM D3111Pass -15°F (-26°C)
Asphalt Compatibility : 140°F (60°C), 72 hr : ASTM D5329Pass