Maxwell Products, Inc. -Elastoflex 51 Hot-Applied Crack and Joint Sealant

DOWNLOADS

Elastoflex 51 is a hot applied, polymer modified crack and joint sealant for use with asphalt and concrete pavements. This product applies and sets up best in up to moderate temperatures, and is highly durable in cold to hot climates.


Category: concrete paving repair | pavement maintenance | paving...

MasterFormat: Flexible Paving Repair | Bases, Ballasts, and Paving | Asphalt Paving Joint Sealants...



Maxwell Products, Inc.
650 South Delong St.
Salt Lake City, UT 84104
Tel: (800) 266-2090

contact@maxwellproducts.com

http://maxwellproducts.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Elastoflex 51 Hot-Applied Crack and Joint Sealant

Elastoflex 51 is a hot applied, polymer modified crack and joint sealant for use with asphalt and concrete pavements. This product applies and sets up best in up to moderate temperatures, and is highly durable in cold to hot climates. Elastoflex 51 is self leveling, quick melting and extremely flexible. Formulated with a low viscosity for maximum crack penetration, it is ideal for highways, county roads, municipal streets, airports and concrete joints. Elastoflex 51 delivers high performance at a moderate cost.

Applicable Specs

ASTM D6690 Type 1 (supersedes ASTM D1190)
AASHTO M324 Type 1 (supersedes AASHTO M173)

Application

Read and follow application instructions before use. This product must be heated using indirect heating methods, either a double boiler or hot oil circulating kettle. Equipment must have means of maintaining constant agitation to the material.
Maximum safe heating temperature: 400°F (204°C).
Recommended application temperature: 380°F (193°C).

Warranty

Maxwell Products, Inc. warrants that our products will be free from defects in material or workmanship and will conform to our published specifications at the time of shipment. In the event our products fail to conform to our published specifications at the time of shipment, we will, at our expense and sole option, replace our defective product or give you a full or partial refund of the purchase price from Maxwell Products. Claims must be made within three (3) months of the date of purchase. MAXWELL PRODUCTS HEREBY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY AND ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

Available in cardboard ZipBox packaging or fully meltable packaging.


See More


Specifications

Specification
Cone Penetration : 77°F (25°C), 150g, 5s : ASTM D532990 dmm max
Softening Point : ASTM D36176°F (80°C) min
Bond : 1 in (25mm), 5 cycles, 50% ext, 0°F (-18°C) : ASTM D5329Pass
Asphalt Compatibility : 140°F (60°C), 72 hr : ASTM D5329Pass