metalflexSBS Energy Efficient Roofing Systems

An elastomeric membrane manufactured with an embossed foil surfacing and reinforced with a woven fiberglass mat. Metalflex SBS is available in standard aluminum and colored aluminum. The aluminum top surface offers unparalleled reflectivity and weather ability. It is Class A fire rated over combustible deck with no slope restrictions

Metalflex SBS Cool White 24 has reflectivity characteristics, which exceed the initial requirements set forth by the United States Environmental Protection Agency Energy Star® standard and by the Energy Efficiency Standards for Residential and Nonresidential Buildings, Title 24 of the California Code of Regulations. Metalflex SBS Cool White 24 reflects 75% of solar energy away from the roof surface

To address the on-going demand for energy efficient roofing systems, MBTechnology has made available the Metalflex SBS modified bitumen membrane, featuring a white, reflective, aluminum surface.

This unique foil-faced surface absorbs much less heat than does a conventional roofing system, thus resulting in reduction of a building’s energy consumption. In most cases, this allows the building owner to use a smaller air conditioning unit.

Metalflex SBS Cool White 24 has reflectivity characteristics, which exceed the initial requirements set forth by the United States Environmental Protection Agency Energy Star® standard and by the Energy Efficiency Standards for Residential and Nonresidential Buildings, Title 24 of the California Code of Regulations. Metalflex SBS Modified Bitumen Cool White 24 reflects 75% of solar energy away from the roof surface

Metalflex SBS is applied in a two-ply configuration over insulated deck and three-ply over wood/light weight concrete. Metalflex SBS offers a flexibility of application with hot asphalt or heat welded application.

Request a Specification File:

The following specification is provided as a guideline for specifying metalflex SBS MF160WAL White 24. MBTechnology is a manufacturer of SBS modified asphalt roofing system and as such has no experience or expertise in the area of architecture / engineering and with regards to consulting in such areas. Final responsibility for the design and suitability of any roofing membrane lies with the designer, architect, consultant contractor and owner. We recommend that the owner’s representative verify the accuracy and appropriateness of a specification provided for any specific project.

See More

See Less