LATICRETE® SELECT-BOND™ Non-Sag Kit is a component of the SELECT-BOND Adhesive System.

Category: 044000 | bed mortar | bedding mortar...

MasterFormat: Common Work Results for Masonry | Surface Bonding Masonry Mortaring | Stone Assemblies...

LATICRETE International, Inc.
One LATICRETE Park North
Bethany, CT 06524
Tel: (800) 243-4788
Fax: (203) 393-1948

Find a rep/distributor

Request More Info


Related Products



The SELECT-BOND™ Non-Sag Kit is a component of the SELECT-BOND Adhesive System. The SELECT-BOND Non-Sag Kit is designed to be mixed with the SELECT-BOND Base Adhesive to provide superior non-sag performance for installation of tile and stone on walls.

SELECT-BOND Base Adhesive is a polymer modified tile and stone adhesive that can be used for both thin bed and Large Heavy Tile applications. Designed to be used alone or mixed with one of three optional SELECT-BOND Adhesive System Kits for additional performance enhancements - Non-Sag, Rapid and High Performance (ANSI A118.15). See individual product data sheets for each SELECT-BOND Adhesive Kit. When used alone (without additional SELECT-BOND Adhesive System Kits), SELECT-BOND Adhesive provides a one-step installation for ceramic tile, porcelain tile, marble and stone on floors and walls. Approved for use over exterior glue plywood for interior installations.

  • Packaging Sizes: 10 x 0.5 lbs (226 g) Kits per Carton ( 2 x .25 lb ( 113 g) packs per Kit)
  • Part of System: LATICRETE®
Features & Benefits
  • Exceeds ANSI A118.4 EHT and ANSI A118.11
  • Supports heavy tile and stone, reducing lippage problems.
  • For interior and exterior floor and wall applications
  • Build up to 3/4" (19 mm) without shrinkage or set-up time problems
  • Superior Non-Sag performance on walls
  • "Extra Heavy" rating per ASTM C627

See More