HYDRO BAN® Waterproofing/Crack Isolation Membrane
HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. HYDRO BAN bonds directly to a wide variety of substrates.
Equipped with Microban Anti-Microbial Protection
- Product #: 9255-XXXX-2
- Packaging Sizes: Commercial Unit: 5 gal (18.9 L) pail liquid (36 commercial units/pallet)
Mini Unit: 4 x 1 gal (3.8 L) pails of liquid packed in a carton (30 cartons/pallet) - Part of System: LATICRETE®
Features & Benefits- Allow for flood testing in 2 hours at 70°F (21°C) or higher
- Does not require the use of fabric (For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions)
- Thin; only 0.020-0.030" (0.5-0.8 mm) thick when cured
- Bonds directly to metal
- PVC and ABS plumbing fixtures only
- Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
- “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
- Changes in color from a light sage to an olive green when cured
- Equipped with anti-microbial technology to protect the treated article.
- Rapid drying for a faster time to tile
- Install tile
- brick and stone directly onto membrane
- Exceeds ANSI A118.10 and A118.12
- IAPMO approved
- Lighter color for ease of inspection
- No solvents and non-flammable
See More
See Less