LATICRETE International, Inc. -HYDRO BAN® Waterproofing Anti Fracture Membrane

DOWNLOADS

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.


Category: anti-fracture membranes | crack isolation membranes | dampproofing...

MasterFormat: Dampproofing and Waterproofing | Dampproofing | Common Work Results for Flooring Preparation...



LATICRETE International, Inc.
One LATICRETE Park North
Bethany, CT 06524
Tel: (800) 243-4788
Fax: (203) 393-1948

technicalservices@laticrete.com

https://laticrete.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


HYDRO BAN® Waterproofing Anti Fracture Membrane

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. HYRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. HYDRO BAN bonds directly to a wide variety of substrates.

  • Product #: 9255-XXXX-2
  • Packaging Sizes: • 3.5GAL PAIL (15.9L PAIL) 3.5GAL PAIL
    • 1 GAL (4 X 3.8L) PAIL
    • 4X1GAL (19L) CARTON
    • 1GAL (13L) 4XCARTON
  • Part of System: LATICRETE®

Features & Benefits
  • Allow for flood testing in 2 hours at 70°F (21°C) or higher (Refer to cautions section for more information on curing)
  • Does not require the use of fabric (For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions)
  • Thin; only 0.020-0.030" (0.5-0.8 mm) thick when cured
  • Bonds directly to metal, PVC and ABS plumbing fixtures only
  • Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
  • “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
  • Changes in color from a light sage to an olive green when cured
  • Equipped with anti-microbial technology to protect the treated article.
  • Rapid drying for a faster time to tile
  • Install tile, brick and stone directly onto membrane
  • Exceeds ANSI A118.10 and A118.12
  • IAPMO approved
  • Lighter color for ease of inspection
  • No solvents and non-flammable


See More


Sweetsstakes