LATICRETE International, Inc. -HYDRO BAN® Board - Shower Installation Systems

DOWNLOADS

HYDRO BAN® Board is a lightweight easy to handle and ready to tile wall board designed to be used in bonded tile or stone installations. It is made with a high-density, waterproof extruded polystyrene core and a reinforced, waterproof membrane on both sides to give triple protection from water and vapor intrusion.


Category: composite wall board | polymers | waterproof backerboard...

MasterFormat: Composite Fabrications | Tiling | Tile-Setting Materials*



LATICRETE International, Inc.
One LATICRETE Park North
Bethany, CT 06524
Tel: (800) 243-4788
Fax: (203) 393-1948

technicalservices@laticrete.com

https://laticrete.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


HYDRO BAN® Board - Shower Installation Systems

HYDRO BAN® Board is a lightweight easy to handle and ready to tile wall board designed to be used in bonded tile or stone installations. It is made with a high-density, waterproof extruded polystyrene core and a reinforced, waterproof membrane on both sides to give triple protection from water and vapor intrusion. HYDRO BAN Board can be used on walls, floors, ceilings, and in many installations requiring dimensionally sound and stable substrates as well as in steam rooms and steam showers. HYDRO BAN Board does not contain cement, fiberglass or paper products and will not cause itching or create messy cement debris during installation. No tab washers are required for floor and wall installations when using the ceramic coated HYDRO BAN Board Screws.

  • Product #: 9450-XXXX-XX
  • Part of System: LATICRETE®

Features & Benefits
  • Heavy Duty, Lightweight, Ready to Tile - Save on labor, freight - cuts easily with utility knife
  • Advanced waterproof extruded polystyrene core - Protects from water intrusion
  • Heavy duty waterproof membrane both sides - Waterproof and ready to tile- saves time and money
  • Low Permeability- approved for steam rooms & showers - Use in steam rooms and steam showers - controls water vapor
  • Rigid & impact resistant panels - Use under tile and stone in any installation requiring dimensionally sound and stable substrate
  • Contains no cement, fiberglass or paper ingredients - Easy to handle- No itchy fiberglass shavings or messy cement debris
  • No tab washers required for floors & walls - Faster, less expensive installation
  • Simple to cut and install - No special tools needed, fast and easy
  • Lifetime system warranty - Best industry warranty available
  • Single source supply - All your shower products from one supplier
  • Board thicknesses range from ¼” to 2” - Used as a tile substrate for walls & floors plus as a structural panel


See More


Specifications

Packaging Sizes:
THICKNESSWIDTHLENGTHSHEETS
PER PALLET
1/4" (6 mm)3' (91 cm)5' (152 cm)85
3/8" (9 mm)3' (91 cm)5' (152 cm)80
1/2" (12.5 mm)3' (91 cm)5' (152 cm)60
5/8" (16 mm)3' (91 cm)5' (152 cm)50
1" (25 mm)3' (91 cm)5' (152 cm)30
1½" (38 mm)3' (91 cm)5' (152 cm)20
2" (50 mm)3' (91 cm)5' (152 cm)15
Sweetsstakes