9235 Waterproofing Membrane

9235 Waterproofing Membrane is a thin (.02” [.5mm]), load bearing, flexible, liquid applied waterproofing membrane system consisting of a liquid rubber polymer that is cold applied with an integral reinforcing fabric to provide a seamless waterproof membrane. It’s quickly applied with a paint brush or long nap paint roller to form a flexible, seamless waterproofing membrane that bonds to a wide variety of substrates (including both common and less ordinary commercial substrates). Our waterproofing membrane also contains antimicrobial protection to inhibit the growth of mold and mildew. LATICRETE manufactures all of the components required for most commercial installations. By being a single source, we guarantee that all of the components are compatible and provide the longest warranties in the industry.

• Product #: 9235-0001-X
• Packaging Sizes:
  • Full Unit: (36 Full Units/pallet) consisting of:
    • 1 x 6 gal (23 L) pail liquid
    • 1 x 300 ft2 (28 m2) roll fabric 38" (965 mm wide)
    • 1 x 75 ft (23 m) long roll fabric 6" (150 mm wide)
  • Mini Unit:
    • 1 x 2 gal (7.6 L) jug liquid
    • 2 x 6" x 75' (15 cm x 23 m) roll fabric
• Part of System: LATICRETE®

• Safe - no solvents and non-flammable
• Interior and exterior use
• Vertical and horizontal surfaces (including ceilings)
• Thin-only 0.02" (0.5 mm) thick when cured
• Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
• “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test).
• IAPMO and ICC Approval
• Applies quickly with a paint brush or roller-no special mixing or application equipment needed
• Fast cure waterproofing membrane - normally ready in hours for finishes
• Install tile, brick and stone directly onto membrane
• Certified Children and Schools by The GREENGUARD Environmental Institute
Easy cleanup-just use water while fresh
• Protects concrete and reinforcing steel from corrosion

See More

See Less