KegWorks -Bar Foot Rail Tubing - Polished Stainless Steel- 2"OD

DOWNLOADS

Add a bar foot railing to your setup with this shiny metal tubing. This polished 304 stainless steel pipe is available in a variety of tube sizes from 2-feet through 8-feet to fit the size of your bar.


Category: bar cabinets | bar casework | bar rails...

MasterFormat: Specialty Casework | Hospitality Casework


Related Products

Overview


Bar Foot Rail Tubing - Polished Stainless Steel- 2" OD

Add a bar foot railing to your setup with this shiny metal tubing. This polished 304 stainless steel pipe is available in a variety of tube sizes from 2-feet through 8-feet to fit the size of your bar.

With its beautiful shiny finish, this polished stainless steel bar foot rail has a mirrored look. This rail is made for an eye-popping, long-lasting look.

To properly install this 2-inch tubing along your bar, add your chosen style of bar foot rail brackets in the same diameter. Be sure to carefully measure where each bracket will be placed before drilling into your bar, wall, or floor. For proper support, bar brackets should be placed at each end of the tubing, plus one for every 4-foot increment.

To allow the bar foot rest to match the unique angles of your bar, use elbows and fittings. With end caps and flanges, you can ensure that your bar rail has a finished look and is mounted correctly in any space.

When ordering tubing, it’s always wise to round up to the nearest foot. If your bar is not an even full foot increment, but rather has some inch increment (i.e. 6’2″, 7’2″) you will need to order up to the next foot. So if your bar is 3’2″ you will need to order a 4-foot piece of tubing, if your bar is 7’2″ you will need to order an 8-foot piece of tubing, and so on. If this is the case, you will need to cut the rail with a miter saw prior to installation.

To connect two sections of tubing together, an internal splicing sleeve can be used. The seam between two joined pieces is then covered by placing a bracket over the joint.

By using this polished stainless steel bar rail tubing with matching components, completing a DIY bar foot rail project, and achieving a consistent look throughout your bar, is easier than it sounds.

Features
  • Steel tubing for bar foot rails
  • Made of 304 grade stainless steel
  • Matching components available
  • Has a polished finish for a mirror look
  • Makes the bar more comfortable for guests
  • A stylish addition to any bar
  • A bracket should be used at both ends and at every 4’ increment
  • Suitable for indoor use only
Specifications
  • 2" Outside Diameter
  • Wall thickness: .050"


See More