 Tools Professional Tension Gauge for 1x19 Cable Railing Johnson’s new Professional Tension Gauge for 1x19 Cable Railing is designed to measure the cable tension of 1/8”, 3/16” and 1/4” 1x19 cable. This gauge takes the guess work out of cable railing setup. Made from anodized aluminum, the gauge is easy to use and compact. A must for the toolbox of anyone installing cable rails. Cable Range:
1/8”, 3/16” & 1/4” Dimensions:
11” x 5-1/2” Tension Range:
200 lbs - 400 lbs Made in USA
 Hand Crimping Tools & Cutters Hand Crimp fittings are attached to the cable with a Johnson-made Hand Crimp Tool model #53-210 (not shown) or #53-215. Hand Crimp fittings should not be confused with Nicopress fittings. Nicopress fittings have sleeves that are made from soft copper alloy and compress very easily. Other crimping tools will not compress Johnson stainless steel fittings properly. Only use a Johnson approved tool. 1. Our Lever Type Tool has two cavities for 1/8” and 3/16” Hand Crimp fittings. This is a good production tool for the dealer. | Lever Type Tool | Cat. No. 53-215 |
2. Our Felco Cable Cutter will give you a clean, crisp cut through 1/4” sized cables. Swiss made | Felco Cable Cutter | Cat. No. 53-220 |
3. Our Larger Felco Cable Cutter cuts cable through 3/8.” | Larger Felco Cable Cutter | Cat. No. 53-222 |
Our Largest Felco Cable Cutter cuts cable through 5/8”. | Largest Felco Cable Cutter | Cat. No. 53-224 (not shown) |
Johnson Architectural Hardware
1 Matthews Drive
East Haddam Industrial Park
East Haddam, CT 06423
Tel: (860) 873-8697
Fax: (860) 873-8589
Tollfree: (800) 874-7455
E-mail: info@csjohnson.com
Web site: http://www.csjohnson.com
|