SLOPETAME3 - Erosion Control System
Made From 100% Recycled Plastic
Slopetame3 provides an immediate and permanent solution to erosion and sedimentation problems. Using the trademark interlocking ring-on-grid design with the added benefit of crossbars on every row Slopetame3 is a reinforcement and stabilization system. The attached geotextile filter fabric will never come off and allows for the growth and containment of vegetation. Even with only a 1” depth required Slopetame3 can permanently stabilize slopes with angles up to 45 degrees. Description and Applications
The 100% recycled plastic rolls are lightweight and easy to install. Secured with a provided duckbill anchor and single rebar, one person can install 430 sf of product in approximately 10 minutes. Slopetame3 can be bent and trimmed with pruning shears to achieve curves, avoid trees and create custom layouts.
Made in the USA Tame These Applications
The Slopetame3 Benefits
- Steep Slope Erosion Control
- Bank Stabilization
- Vegetated Swale Applications
- Stormwater Infiltration Trenches
- 1:1 Slope Erosion Control
- Permanent Stabilization
- Vegetation Containment
- Controlled Porosity
- Lightweight and Easy to Install
- UV Resistant
- 100% Recycled Plastic
Manufactured in 1 square meter units (3.3′ x 3.3′) and assembled into rolls 1m x 10m or 2m x 20m. Rolls can be cut as needed on site with pruning shears. Some curves can be achieved without cutting.
- Size: 2 roll sizes
- Color: black - standard, color - custom order
- Weight: 2.0 kg/m2 (.42 lbs/sf)
- Strength: 1120.69 kg/cm2 (15,940 psi) when filled with sand.