Invisible Structures, Inc. -Rainstore3 Underground Water Storage System

DOWNLOADS

Rainstore3 is a modular and stackable structure used to store stormwater underground. Made from injection molded plastic, a single panel contains 36 vertical columns and exceeds H-20 loading, allowing the construction of driving areas, parking lots, or other small structures above the system. Built-


Category: modular stormwater storage units | stormwater detention | stormwater drainage...

MasterFormat: Facility Storm Drainage | Facility Storm Drains | Facility Area Drains...



Invisible Structures, Inc.
1600 Jackson Street
Suite 310
Golden, CO 80401
Tel: (800) 233-1510
Fax: (800) 233-1522

sales@invisiblestructures.com

http://www.invisiblestructures.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Rainstore3 Underground Water Storage System

Rainstore3 is a modular and stackable structure used to store stormwater underground. Made from injection molded plastic, a single panel contains 36 vertical columns and exceeds H-20 loading, allowing the construction of driving areas, parking lots, or other small structures above the system. Built-in compression fittings allow units to be easily stacked to a variety of depths up to 7.9ft pr 2.4 meters.

Benefits
  • Allows development of valuable land resources by moving stormwater ponds below ground
  • Available Pre-Assembled in Depths from 4″ to 7.9 ft (2.4 m)
  • 94% Open for Water Storage
  • Eliminates Stone Requirements
  • Easy Installation
Applications
  • Underground Stormwater Storage
  • Detention or Retention Systems
  • Water Harvesting

The Rainstore3 modular system is more efficient at storing and recharging water than arched chambers and corrugated plastic or metal pipe. Rainstore3 is less expensive than concrete vault chamber.

33 49 23.13 Undrground Storm Drainage Water Retention Tanks

Rainstore3 is listed in the Construction Specifiers Master Spec Format predominantly in section 33 49 23.13 Underground Storm Drainage Water Retention Tanks. You may also place it in the 1995 Master Format Version in section 02630 Storm Drainage Containment & Reuse.

Sizes

40″ x 40″ x 4″ (1 meter x 1 meter x 10 centimeters). Cells can be assembled in heights from one unit (10 cm, 4 inches), to 24 units (2.4 meters, 7.9 feet).


See More


Sweetsstakes