HySecurity -HydraSwing 40 - Swing Gate Linear Actuator

DOWNLOADS

Single leaf

Linear actuator for heavy swing gates and swing gates subject to peak wind loads. Gracefully cycle up to 4,000 lb (1,814 kg) gate leaf in 15-20 seconds.* Maximum single leaf gate length 24 ft (7.3 m).


Category: DC powered gate operators | gate controllers | industrial gate hardware...

MasterFormat: Instrumentation and Control for Electrical Systems | Electrical Controls and Relays | Fences and Gates...



HySecurity
6705 S 209th St, Ste 101
Kent, WA 98032
Tel: (800) 321-9947
Fax: (888) 321-9946

specs@hysecurity.com

https://hysecurity.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


HydraSwing 40 - Swing Gate Linear Actuator

Single leaf

Linear actuator for heavy swing gates and swing gates subject to peak wind loads. Gracefully cycle up to 4,000 lb (1,814 kg) gate leaf in 15-20 seconds.* Maximum single leaf gate length 24 ft (7.3 m). A separate HydraSupply enclosure containing Smart Touch Controller and hydraulic power unit is remotely located, up to 100 ft, from the gate.

HydraSwing is the perfect choice of linear actuator for large, heavy swing gates and swing gates subject to extreme wind load factors. Ideal for commercial, industrial or residential sites.

Gracefully move a 16 ft/4,000 lb leaf in 10-15 seconds and a 40 ft/15,000 lb gate leaf in 20-30 seconds.* HydraSwing features symmetrical design for left or right hand mounting and industrial grade components for extremely low maintenance and exceptionally long life.

Proven reliable hydraulics and industrial grade components mean low maintenance and long operator life.

Easily configure gate operation to specific site requirements with HySecurity's Smart Touch Controller. PC interface provided for easy configuration and quick troubleshooting using Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.). Three configurable user relays plus optional Hy8Relay™ - an extended relay module providing eight additional programmable relay outputs.

Seamless synchronization with all HySecurity operators for dual gate, sally port or sequenced gate applications.

Note: Actual open/close time dependent on gate weight/length, percentage of open area on panel and anticipated wind speed.


See More


Specifications

Operator Specs
Duty CycleContinuous
Arm Speed15-20 seconds, field adjustable*
Single Or TwinSingle leaf
Gate Lengthup to 24 ft (7.3 m)**
Gate Capacity4,000 lb (1,814 kg)**
Operator HP2 hp
Drive TypeHydraulic
UPSOptional 230V AC Power Supply w/HyInverter AC™ ***
Single Phase Voltages208/230V 60/50Hz
Three Phase Voltages208/230V 60/50Hz or 380/460V 60/50Hz
Temperature Rating-40º to 158º F (-40º to 70º C) No heater necessary
CommunicationRS-232, RS-485; Ethernet/fiber using optional HyNet™ Gateway accessory
User ControlsSmart Touch Controller with 70+ configurable settings. Smart Touch keypad and 32 character, OLED display or a PC using S.T.A.R.T. software.
RelaysThree configurable user relays: one 30VDC, 3A solid state and two 250VAC, 10A electromechanical. Optional Hy8Relay™ for 8 additional relay outputs.
App ClassUsage Class I, II, III, IV
EnclosureType 3R, 30w x 42h x 12d inch (76w x 107h x 30.5d cm)
Finish TypeZinc plated steel chassis with stainless steel cover
Warranty5 year
**Actual open/close time dependent on gate weight/length, percentage of open area on panel and anticipated wind speed.
****Gate length/weight specifications are dependent on height, percentage of open area on panel and anticipated wind speed.
******The operator’s normal duty cycle and the actual number of gate cycles available from battery depends upon gate length/weight, battery size, state of charge and health, ambient temperature, accessory power draw and frequency of gate cycles during power outage.
Operator Components
ModelPart NumberEst. Ship WeightShipping DimensionsShipping Class
HydraSwing 40 Drive UnitHSG 40 Drive Unit150 lb44"w x 26"d x 28"h70
HydraSwing 40 Power UnitHSG 40 Power Unit261 lb40"w x 40"d x 50"h70