Hubbell Water Heaters -Heating Coils Hot Water Heating Coils

DOWNLOADS
Hubbell water heating coils are designed to efficiently transfer heat from a steam, boiler water, solar water or high temperature hot water (HTHW) system to the domestic potable hot water system.

Category: process heaters | process water heaters | water heaters...

MasterFormat: Plumbing Equipment



Hubbell Water Heaters
45 Seymour Street
P.O. Box 288
Stratford, CT 06615
Tel: (203) 378-2659
Fax: (203) 378-3593

info@hubbellheaters.com

http://www.hubbellheaters.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Heating Coils Hot Water Heating Coils

Hubbell water heating coils are designed to efficiently transfer heat from a steam, boiler water, solar water or high temperature hot water (HTHW) system to the domestic potable hot water system. The primary heat source (steam, boiler water, solar water or HTHW) travels through the tubing in the Hubbell heating coil and transfers heat to the secondary system (potable water) without allowing either system to come into direct contact with the other. Hubbell heating coils are designed and constructed for maximum efficiency and longevity and additional features are readily available to provide the most appropriate style and material of construction for virtually any application. When you specify and install a Hubbell water heating coil, you will have confidence in knowing the owner will be provided with a trouble-free and long lasting source for hot water.


High Quality Construction
  • Each tube bundle is constructed according to ASME requirements to ensure the highest performance in even the most demanding application
Wide Selection
  • Available in a full range of styles and sizes to meet the specific requirements of any commercial or industrial application
Versatility
  • Hubbell heating coils utilize Steam, Boiler Water, Solar Water or High Temperature Hot Water (HTHW) to heat potable water

Optional Equipment
Tube Gauge:
  • 20 BWG
Tube O.D.:
  • 1 1/4" (typically used in long tube bundles with high capacity recovery ratings and lower steam pressure)
  • 1/2" O.D. Tube
Tube Materials:
  • 90/10 Copper-Nickel, Type 304 or 316L Stainless Steel, Carbon Steel
Tube Sheet:
  • 90/10 Copper-Nickel, Stainless Steel
Head:
  • Fabricated Carbon Steel with Copper Coating, Fabricated Stainless Steel (304 or 316L)
Tube Sheet Style:
  • Full face tube sheet
Construction:
  • ASME stamped and certified
  • ANSI class 300 flanged construction
  • Built in accordance to TEMA Standards
Fouling Factor:
  • Specify as required
Supports:
  • Typically installed if tubes are over 30" in length
Baffle System:
  • Used in shell and tube type heat exchangers, not required in storage tank heaters unless the heating coil is a "wrapped and baffle" design utilizing a pump for forced circulation over the coil


See More


Specifications

Heating Coils Tube Standard Specifications
Material: Copper
Size O.D.: 3/4"
Gauge: 18 BWG
Design WP: 150 psi
Design TP: 225 psi
Design Temp: 350°F
Fouling Factor: 0.00025
Tube Sheet Material: Non Ferrous (domestic side)
Tube Sheet Style: Between Bolt Design
Head Construction: Fabricated Carboon Steel to ANSI B16.5 Class 150
Tube Spacer: Resin impregnated compsoite
Gasket: Non Asbestos
Warranty: 1 Year
Tube Bundle General Configuration
Sweetsstakes