ADA Vandal-Resistant Motion-Activated Fountain and Bottle Filler - 1001HO-1920HO
ADA Vandal-Resistant Motion-Activated Fountain and Bottle Filler
The Haws 1001HO-1920HO ADA vandal-resistant touchless stainless-steel drinking fountain and bottle filler incorporates sensor operated stainless steel solenoid valves controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.
- Touchless operation for safety and peace of mind
- Vandal resistant components include the bubbler, bowl, drain and bottom plates.
- 18 gauge Type 304 Stainless Steel bowl assembly mounted on a 14 gauge Type 304 Stainless Steel wall bracket and bottle filler
- 1 gpm (3.78 L) bottle filler laminar flow
- 30-second obstruction time-out to reduce tampering of sensor
- 100% lead-free waterways
- Polished chrome-plated brass vandal-resistant bubbler head with integral laminar anti-squirt flow eliminates water splash
- Beautiful satin finish resists stains and corrosion
- Trap and shut off must be in the wall
- The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate.
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
Prop 65 Warning. For California Residents Warning: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.
Certifications - CSA Certified
- ADA Compliant
- NSF/ANSI/CAN 61-2020 with Q ≤ 1
SpecificationsModel 1001HO-1920HO ADA wall mounted motion activated drinking fountain and bottle filler shall include 18 gauge Type 304 Stainless Steel satin finish basin with integral swirl design, 14 gauge Type 304 Stainless Steel wall bracket and bottle filler bracket, 100% lead-free waterways, sensor operated stainless steel solenoid valves with 30-second obstruction time-out controlled by a transformer, polished chrome-plated brass vandal-resistant bubbler head with integral laminar anti-squirt flow, chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plates, and 1-1/4" O.D. (3.2 cm) waste pipe. (P-trap and stop require rear access). The botte filler requires a mounting plate; either the Haws model 6700 in-wall or the 6700R on-wall support plate.
See More
See Less