ADA Motion-Activated Vandal-Resistant Fountain and Bottle Filler w/Mounting System - 1001MSHO-1920HO
ADA Motion-Activated Vandal-Resistant Fountain and Bottle Filler w/Mounting System
The Haws 1001MSHO-1920HO ADA touchless stainless steel vandal-resistant drinking fountain and bottle filler incorporates sensor operated stainless steel solenoid valves controlled a by transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.
- Touchless operation for safety and peace of mind
- Vandal resistant components include bubbler, bowl, drain and bottom plates
- 30-second obstruction time-out to reduce tampering of sensor
- 18 gauge Type 304 Stainless Steel bowl assembly mounted on a 14 gauge Type 304 Stainless Steel wall bracket
- Front access plate allows for front access of P-trap and stop
- 100% lead-free waterways
- 1 gpm (3.78 L) bottle filler laminar flow
- Polished chrome-plated brass bubbler head with integral laminar anti-squirt flow eliminates water splash
- Beautiful satin finish resists stains and corrosion
- The bottle filler requires a mounting plate; either the 6700 in-wall or the 6700R on-wall support plate.
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1.
Prop 65 Warning. For California Residents Warning: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.
Certifications - CSA Certified
- ADA Compliant
- NSF/ANSI/CAN 61-2020 with Q ≤ 1
SpecificationsModel 1001MSHO-1920HO ADA wall mounted motion-activated vandal-resistant drinking fountain and bottle filler shall include an 18 gauge Type 304 Stainless Steel satin finish basin with integral swirl design, 14 gauge Type 304 Stainless Steel wall bracket and bottle filler bracket, stainless steel satin finish back and access panels allowing for front access of P-trap and stop, in-wall mounting frame, 100% lead-free waterways, sensor operated stainless steel solenoid valves with 30-second obstruction time-out controlled by a transformer, polished chrome-plated brass vandal-resistant bubbler head with integral laminar anti-squirt flow, chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plate, and 1-1/4" O.D. (3.2 cm) waste pipe. The botte filler requires a mounting plate; either the Haws model 6700 in-wall or the 6700R on-wall support plate.
See More
See Less