GAF -United Coatings™ Aquathon® Wall Coating

DOWNLOADS

Liquid-applied United Coatings™ Aquathon® Wall Coating is a 100% acrylic elastomer coating designed to waterproof concrete and masonry wall surfaces as well as bridge existing and future hairline cracks.


Category: damproofing | special coatings | wall coatings...

MasterFormat: Cast-In-Place Concrete | Concrete Finishing | Dampproofing and Waterproofing...


Related Products

Overview


United Coatings™ Aquathon® Wall Coating

Why United CoatingsAquathon® Wall Coating?

Liquid-applied United Coatings™ Aquathon® Wall Coating is a 100% acrylic elastomer coating designed to waterproof concrete and masonry wall surfaces as well as bridge existing and future hairline cracks.

Benefits

  • Single Component: Aquathon® Wall Coating is a ready-to-use material requiring no catalyzation
  • No Solvents: Aquathon® Wall Coating is a water-based elastomeric emulsion conforming to all VOC and air pollution standards
  • Uniform High Film Build: The product’s thixotropic consistency gives it excellent vertical hold, allowing full application in one or two coats
  • Low-Temperature Performance: Aquathon® Wall Coating is unique in that its elongation properties are maintained at cooler temperatures, contributing to its ability to bridge hairline cracks and withstand freeze/thaw cycling
  • Abrasive Weather Conditions: Aquathon® Wall Coating will withstand all normal weather conditions
Uses

Aquathon® Wall Coating was specifically developed to waterproof vertical concrete and masonry building exteriors, wood, and hardboard substrates.


See More


Specifications

Specifications
Dry Time to Touch1½ hrs (75°F, 50% R.H.)
Elongation300 (±50) @ 75°F 400 (±50) @ 0°F
Elongation After AgingAfter 2,000 hrs exposure, AQUATHON retained 95% of its elastomeric properties
Hardness60 - 70 Shore
Low & High Temperature LimitsFilms retained their ability to be flexed 180° without cracking at temperatures from -30°F to 200°F (-34°C to 94°C) with no age hardening or slump.
Permeance7.7 perms
Solids by Volume55% ± 2
Solids by Weight68% ± 2
ColorsAvailable in 2 tintable bases
Tensile Strength150 psi (1.0 kPa) (±25) @ 75°F 400 psi (2.8 kPa) (±25) @ 0°F
VOC<50 g/L
Sweetsstakes