Foster® 85-45 FOS-STIK™ ADHESIVE
FOSTER FOS-STI KTM ADHESIVE
FOSTER FOS-STIK ADHESIVE is a rapid tacking, low soak-in aerosol spray adhesive used to adhere a wide variety of insulation materials to metal or other construction surfaces where immediate adhesion and high initial adhesive strength are required. It can be used either as a one-way wet, or a two-way contact cement.
FOS-STIK ADHESIVE is waterproof, flexible, transparent and non-staining. It contains no chlorinated solvents or ozone depleters. It cleans up easily with Mineral Spirits.
FOS-STIK ADHESIVE meets ASTM C916, Type IV (ASC-A-7001A, Type IV) requirements.
FOS-STIK ADHESIVE can also be used for adhering difficult substrates like polyethylene film, phenolic, polyolefin, elastomeric foam, or most plastics, leather, wood, and cloth.
FOS-STIK ADHESIVE meets the requirements of LEED Certification: Indoor Environmental Quality- Credit 4.1 (Low-Emitting Materials: Adhesives and Sealants). This product complies with California Air Resources Board Standard and Green Seal Standard GS-36 for web spray aerosol adhesives at less than 55% VOC.
FOS-STIK ADHESIVE contains no asbestos, lead, mercury, or mercury compounds.
Store and apply between 40°F (4°C) and 100°F (38°C). Not intended for use on vinyl.
Clear, light amber
Web Spray, Aerosol Can Packaging
AVERAGE WEIGHT / U.S. GALLON (ASTM D 1475):
5.0 lbs. (0.6 kg/l)
AVERAGE NON-VOLATILE (ASTM D 2369):
14-16% by volume (20-21% by weight)
20 fluid ounces Net Wt. 12 oz. (340 grams)
COVERAGE RANGE (FSTM 72):
(Subject to type of service and nature of material being bonded) 30-45 ft2/can (9.1-13.7 m)
BONDING TIME (ASTM D 66):
0 to 5 minutes
SERVICE TEMPERATURE LIMITS (FSTM 70):
(Temperature at coated surface) -40ºF to 180ºF (-40ºC to 82ºC)
WET FLAMMABILITY (ASTM D 3278):
Flash Point -40ºF (-40ºC)
TM TradeMark of HB Fuller Construction Products Inc.
Visit us on the web at www.fosterproducts.com