Foster® 85-00 LINE-FAS™ ADHESIVE
FOSTER LINE- FASTM ADHESIVE
FOSTER LINE-FAS ADHESIVE is an economical pure polymer water-base duct liner adhesive with excellent fire resistance, tack development, and bond strength.
LINE-FAS ADHESIVE is intended for high volume spray and coil line operations. It runs smoothly on spray head, extrusion, or roll coater equipment. Its fine atomization makes it ideal for manual spray applications as well.
LINE-FAS ADHESIVE is solvent free and features an exceptionally mild odor with very low VOC level. It has a mild/negligible odor when wet and no odor when dry.
LINE-FAS ADHESIVE meets ASTM C-916 Type II (ASC-A-7001, Type II) adhesive requirements. It is intended for bonding fiberglass and mineral wool duct liner insulation to galvanized steel.
LINE-FAS ADHESIVE meets NFPA 90A and 90B 25/50 requirements.
LINE-FAS ADHESIVE meets requirements for LEED IEQ 4.1 Low-Emitting Materials, Adhesives and Sealants. VOC: 5 g/l, less water and exempt solvents.
LINE-FAS ADHESIVE is produced under the classification and follow- up service of Underwriter's Laboratories, Inc.
ASTM-C-916 PERFORMANCE 7.1 Bond Strength @ R.T. 3.0±1.0 pli 7.2 Bond Strength @ 95% RH 2.5±0.5 pli 7.3 Bond Strength @ 158ºF 2.5±0.5 pli 7.4 Bond Retention, 90 day, 158ºF-Pass, 100% Bond Fiber Failure
Store and apply between 40ºF (4ºC) and 100ºF (38º), protect from freezing until dry. Not suggested for sealing vapor barrier jackets. Overhead applications may require mechanical fasteners.
White (Wet), Translucent (Dry)
Smooth, Excellent Spray and Extrusion
AVERAGE WEIGHT / U.S. GALLON (ASTM D 1875):
8.8 lbs. (1.05 kg/l)
AVERAGE NON-VOLATILE (ASTM D 1644):
38% by volume (40% by weight)
400-500 ft2/gal (9.2-12.3 m2/l)
DRYING TIME (75ºF (24º) 50% RH):
Set to Touch: 15 minutes
Dry Through: 3 hours
SERVICE TEMPERATURE LIMITS (FSTM 70):
-20ºF to 200ºF (-29ºC to 93ºC)
TIME TO FIBER TEAR:
30- 60 minutes, 1" Duct Liner
BOND STRENGTH TO GALVANIZED STEEL:
40ºF (4ºC) 20 Hours 2.5±0.5 pli
WET FLAMMABILITY (ASTM D 3278):
No flash to boiling, >200ºF (93ºC)
SURFACE BURNING CHARACTERISTICS (ASTM E 84):
Flame Spread: 5
Smoke Developed: 0 Coverage Rate: 400 ft2/gal (9.8 m2/l)
Applied to 1/4 inch (6.4mm) inorganic reinforced cement board. The flame spread may vary at different product thicknesses and/or when applied over other surfaces. TM TradeMark of H.B. Fuller Construction Products Inc.
Visit us on the web at www.fosterproducts.com