Foster™ -Foster® 81-10 S.M. ADHESIVE

DOWNLOADS

FOSTER ® S.M. ADHESIVE Foster ® S.M. Adhesive is a low cost, quick-setting synthetic elastomer adhesive for use with fibrous glass insulation (up to 3 lbs./cu.ft.) duct wrap and acoustical linings for air handling ducts. S.M. Adhesive is designed for use in applications where fibrous glass


Category: HVAC adhesives | adhesives | commercial insulation...

MasterFormat: Adhesives* | Common Work Results for HVAC | HVAC Insulation...


Related Products

Overview


Foster® 81-10 S.M. ADHESIVE



FOSTER ® S.M. ADHESIVE

Foster ® S.M. Adhesive is a low cost, quick-setting synthetic elastomer adhesive for use with fibrous glass insulation (up to 3 lbs./cu.ft.) duct wrap and acoustical linings for air handling ducts.

S.M. Adhesive is designed for use in applications where fibrous glass insulation is bonded to the interior or exterior of sheet metal air-conditioning ducts.

S.M. Adhesive meets ASTM C916, Type IV (ASC-A-7001-A, Type IV) and NFPA 90A and 90B 25/50 requirements.

S.M. Adhesive is produced under the classification and follow- up service of Underwriter's Laboratories, Inc.

S.M. Adhesive contains no asbestos, lead, mercury, or mercury compounds.

LIMITATIONS
Store and apply between 40ºF (4ºC) and 100ºF (38ºC). Always test plastic materials for compatibility when using solvent base products. Make certain this product is completely dry and the area free from solvent odor if food is involved. Not suggested for sealing vapor barrier jackets. Allow to dry to a solvent-free condition before installing weld pins. Overhead applications may require mechanical fasteners.

05/14


COLOR:
Green

APPLICATION CONSISTENCY:
Spray, brush or roller.

AVERAGE WEIGHT / U.S. GALLON (FSTM 3):
6.2 lbs. (0.74 kg/l)

AVERAGE NON-VOLATILE (FSTM 9A):
17-19% by volume (27-30% by weight)

COVERAGE RANGE (FSTM 72):
(Subject to type of surface and nature of material being bonded.) 200 to 400 sq. ft. per gallon (4.9 to 9.8 m2/l) 0.008 in. to 0.004 in. wet film thickness (0.2 to 0.1 mm)

BOND TIME RANGE (FSTM 66):
0 to 15 minutes

SERVICE TEMPERATURE LIMITS (FSTM 70):
(Temperature at coated surface) -20ºF to 200ºF (-29ºC to 93ºC)

WET FLAMMABILITY (ASTM D 93):
Flash point -7ºF (-22ºC)

SURFACE BURNING CHARACTERISTICS (ASTM 84):
Flame Spread: 10
Smoke Developed: 25
Tested at coverage rate of 200 sq. ft./gal. (4.9 m2/l).
Applied to 1/4 inch (6.4 mm) inorganic reinforced cement board. The flame spread may vary at different product thicknesses and/or when applied over other surfaces.


TM TradeMark of H.B. Fuller Construction Products Inc.

Visit us on the web at www.fosterproducts.com


See More


Sweetsstakes