Foster™ - Foster® 40-60™ Drip Pan Coating

DOWNLOADS

Foster ® 40-60 Drip Pan Coating is a water-based, fire resistive, flexible, and tough coating for the protection of metal drip pans used in HVAC systems. It bonds to the surface of clean, bare metal without the use of primers, maintaining long-term protection of drip pans against corrosion, and


Category: fire-resistant coatings | metal coatings | mold remediation coatings...

MasterFormat: Mold Remediation | Painting and Coating | High-Performance Coatings...


Related Products

Overview


Foster® 40-60™ Drip Pan Coating



Foster ® 40-60 Drip Pan Coating is a water-based, fire resistive, flexible, and tough coating for the protection of metal drip pans used in HVAC systems. It bonds to the surface of clean, bare metal without the use of primers, maintaining long-term protection of drip pans against corrosion, and reducing periodic maintenance.

Foster 40-60 Drip Pan Coating has excellent long-term resistance against the detrimental effects of harmful fungus, algae, and bacteria, and will not support their growth on the coating's surface. It will also provide vibration dampening.

Foster 40-60 Drip Pan Coating has the water resistance and low water vapor permeance normally found only in solvent-based coatings. It can be used in high humidity or wet environments. It will greatly retard moisture vapor penetration and inhibit corrosion of metal surfaces.

Foster 40-60 Drip Pan Coating may be placed in service after a minimum of 96 hours dry time. It dries forming a strong bond to galvanized steel, aluminum, or mild steel surfaces.

Foster 40-60 Drip Pan Coating meets requirements for LEED ® EQ Credit 4.2, low-emitting materials: paints and coatings.

Foster 40-60 Drip Pan Coating contains no asbestos, lead, mercury or mercury compounds.

LIMITATIONS:
Store and apply between 40ºF (4ºC) and 100ºF (38ºC). Protect from freezing until dry. Water-based products may corrode carbon steel equipment. Corrosion resistant pumps and fittings are suggested. See other side for the complete directions and limitations.

DO NOT DILUTE.


PROPERTIES ATTRIBUTES

COLOR:
Gray

APPLICATION CONSISTENCY:
Brush, trowel, or spray

AVERAGE WEIGHT/U.S. GALLON (ASTM D1475):
11.4 lbs. (1.37 kg/l)

AVERAGE NON-VOLATILE (ASTM D2369):
56% by volume (68% by weight)

COVERAGE RANGE (FSTM 72):
33-40 sq. ft. per gallon (0.8-1.0 m2 /l) 0.048-0.040 in. (1.2-1.0 mm) wet film thickness

DRYING TIME RANGE (ASTM D1640):
Set to Touch: 2 hours
Dry Through: 4-7 days. High humidity or low temperatures retard drying.

SERVICE TEMPERATURE LIMITS (FSTM 165):
0ºF to 200ºF (-18ºC to 93ºC)

WATER VAPOR PERMEANCE (ASTM F1249):
90% RH, 100ºF, 20 mils dry 0.19 perm (0.13 metric perm)

WET FLAMMABILITY (ASTM D3828):
No flash to boiling, 210ºF (99ºC)

SURFACE BURNING CHARACTERISTICS (ASTM E84):
Flame Spread: 10
Smoke Developed: 35 Tested at a coverage rate of 40 square feet per gallon (1.0 m2 /liter). Applied to inorganic reinforced cement board. The flame spread may vary at different product thicknesses and/or when applied over other surfaces.

Visit us on the web at www.fosterproducts.com

Foster is a trademark of Specialty Construction Brands, Inc.


See More


Sweets app for Revit – Learn More