Flushite Plastic Laminate Overhead Braced Bathroom Partitions

Plastic laminate bathroom partition units are made of fine quality plastic surface material that is applied with adhesive.

A wide range of designer colors is available to coordinate with modern or traditional interiors.

• Finest quality lamination
• Wide range of colors available
• Suited to many interior situations where color is important

DOOR & PANELS

Door & panels shall be constructed of a sandwich of laminated plastic bonded under pressure to a solid particleboard core with the highest quality adhesive assuring a rigid, permanent bond. Door and panels finish - 1″ thickness.

PILASTERS

The anchoring device shall consist of a leveling device fastened to bottom of pilaster and attached to the floor. Pilasters shall be constructed of a sandwich of laminated plastic bonded under pressure to a solid particleboard core. Pilaster shall be 1-1/4″ thick.

HARDWARE

All hardware shall be heavy nonferrous chrome plated castings. Fastenings by means of thru-bolts with theft proof heads. Pilaster shoe shall be 4″ high, of #302, 18-8 polished stainless steel. Includes all necessary hardware and fittings for a complete installation. Brass and stainless steel hardware available at additional cost.

SURFACING

All faces and edges shall be 1/16″ general purpose laminated plastic. All in accordance with NEMA standards.

FINISH

Laminated plastic shall be as selected from Flush Metal’s standard plastic colors and patterns.

COLOR

As selected from color guide.

See More

See Less