Florestone Products Co. -Saflor® Model 3636-2 Corner

DOWNLOADS

Furnish and install 3636-2 Saflor® Shower Receptor manufactured by Florestone Products Co. The receptor shall have a slip-resistant design that does not interfere with the flow of water nor trap it.


Category: health care showers | healthcare shower fixtures | hospital showers...

MasterFormat: Healthcare Equipment | Residential Showers | Healthcare Plumbing Fixtures...



Florestone Products Co.
2851 Falcon Drive
Madera, CA 93637
Tel: (800) 446-8827
Fax: (559) 661-2070

info@florestone.com

https://www.florestone.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Saflor® Model 3636-2 Corner

Furnish and install 3636-2 Saflor® Shower Receptor manufactured by Florestone Products Co. The receptor shall have a slip-resistant design that does not interfere with the flow of water nor trap it. Receptor to have integral molded drain and square finished design to allow either right-hand or left-hand installation. Receptor to have not less than 1" flange on two sides and to be stain and fungus resistant. Color to be off-white (unless other specified) and will be resistant to fading and abrasion.

Model shall conform to ANSI-Z-124.2.

SAFLOR® Options and Accessories

Biscuit, Bone Josam Jiffy-Joint™ Wedge-Lok® Seal Strainer, Brass Strainer, Chrome Strainer, Plastic Repair Kit

Dimensions may vary ± ¼ inch.

Place receptor on a minimum ¼" bed of mortaror plaster for warranty compliance.

One piece, double threshold model for corner installation. Square 36" x 36" dimension allows either right-hand or left-hand corner installation.

Standards:

I.A.P.M.O. - International Association of Plumbing and Mechanical Officials File No. 0687.

ANSI - American National Standards Institute - Specifications Z-124.2.

HUD/FHA - National Specifications UN-73.


See More


Specifications

ModelWT
3636-2
53