Saflor® Corner Shower Receptors
Furnish and install Saflor® Shower Receptor manufactured by Florestone Products Co. (Model Number - see table) The receptor shall be furnished with a slip-resistant design that does not interfere with the flow of water nor trap it. Receptor to have integral molded drain and sill with aluminum cap on the side adjacent to the threshold. Receptor to have not less than 1" flange on remaining sides. Receptor to be stain and fungus resistant. Color to be off-white and will be resistant to fading and abrasion. Model shall conform to ANSI-Z-124.2.
Biscuit, Bone Josam Jiffy-Joint™
Wedge-Lok® Seal Strainer, Brass Strainer, Chrome Strainer, Plastic Repair Kit
One piece, right or left-hand corner model with metal capped sill ¾" wide and ¼" high for glass side wall installation on left or right side of threshold. 1¼" flange on two remaining sides. Integral drain with Wedge-Lok® Seal.
SAFLOR® Options and Accessories
I.A.P.M.O. - International Association of Plumbing and Mechanical Officials File No. 0687.
ANSI - American National Standards Institute - Specifications Z-124.2.
HUD/FHA - National Specifications UN-73.