Florestone Products Co. -Model 3PC-32-60H Institutional Shower 60" x 31" x 81½"

DOWNLOADS

Furnish and install three-piece gel-coated fiberglass shower stall Model 3PC-32-60H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2.


Category: health care showers | healthcare shower fixtures | healthcare showers...

MasterFormat: Plastic Shower and Dressing Compartments | Tub and Shower Enclosures | Healthcare Equipment...



Florestone Products Co.
2851 Falcon Drive
Madera, CA 93637
Tel: (800) 446-8827
Fax: (559) 661-2070

info@florestone.com

http://www.florestone.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Model 3PC-32-60H Institutional Shower 60" x 31" x 81½"

Furnish and install three-piece gel-coated fiberglass shower stall Model 3PC-32-60H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat.

When ordering please specify right or left hand seat and drain location: center, right-hand drain or left-hand drain.

Supplied with 2" brass drain.

Shower curtain optional.
Curtain Size: 72" x 72".
Standard Color: White.
Special order colors available.

Shower comes complete with accessories:

• Stainless steel curtain rod

• Symmons® pressure balance mixing valve

• Moen® hand-held shower head with hose and stainless steel slide bar/grab bar

• stainless steel corner grab bar

• Stainless steel recessed soap dish

• White naugahyde folding wheelchair transfer seat(specify right or left hand)

Optional: Phenolic folding wheelchair transfer seat (specify right or left hand)

Dimensions may vary ± ¼ inch. Please check unit before installation.

For barrier-free installation, contractor shall provide recess for curb in sub floor.

Note: Exterior floor drain for water run-off recommended.

Symmons® is a Registered Trade Mark of Symmons Industries, Inc.

Moen® is a Registered Trade Mark of Moen Corporation.

Standards:

I.A.P.M.O. Listed File 0687

ANSI-Z-124.2


See More


Specifications

Sweetsstakes